Subversion Repositories Tronxy-X3A-Marlin

/**

 * Marlin 3D Printer Firmware

 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

 *

 * Based on Sprinter and grbl.

 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

 *

 * This program is free software: you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation, either version 3 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

 *

 */

/**

 * Arduino Sd2Card Library

 * Copyright (C) 2009 by William Greiman

 *

 * This file is part of the Arduino Sd2Card Library

 */

#ifndef _SDINFO_H_

#define _SDINFO_H_

#include <stdint.h>

// Based on the document:

//

// SD Specifications

// Part 1

// Physical Layer

// Simplified Specification

// Version 3.01

// May 18, 2010

//

// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs

// SD card commands

uint8_t const CMD0 = 0x00,    // GO_IDLE_STATE - init card in spi mode if CS low

              CMD8 = 0x08,    // SEND_IF_COND - verify SD Memory Card interface operating condition

              CMD9 = 0x09,    // SEND_CSD - read the Card Specific Data (CSD register)

              CMD10 = 0x0A,   // SEND_CID - read the card identification information (CID register)

              CMD12 = 0x0C,   // STOP_TRANSMISSION - end multiple block read sequence

              CMD13 = 0x0D,   // SEND_STATUS - read the card status register

              CMD17 = 0x11,   // READ_SINGLE_BLOCK - read a single data block from the card

              CMD18 = 0x12,   // READ_MULTIPLE_BLOCK - read a multiple data blocks from the card

              CMD24 = 0x18,   // WRITE_BLOCK - write a single data block to the card

              CMD25 = 0x19,   // WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION

              CMD32 = 0x20,   // ERASE_WR_BLK_START - sets the address of the first block to be erased

              CMD33 = 0x21,   // ERASE_WR_BLK_END - sets the address of the last block of the continuous range to be erased*/

              CMD38 = 0x26,   // ERASE - erase all previously selected blocks */

              CMD55 = 0x37,   // APP_CMD - escape for application specific command */

              CMD58 = 0x3A,   // READ_OCR - read the OCR register of a card */

              ACMD23 = 0x17,  // SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be pre-erased before writing */

              ACMD41 = 0x29;  // SD_SEND_OP_COMD - Sends host capacity support information and activates the card's initialization process */

/** status for card in the ready state */

uint8_t const R1_READY_STATE = 0x00;

/** status for card in the idle state */

uint8_t const R1_IDLE_STATE = 0x01;

/** status bit for illegal command */

uint8_t const R1_ILLEGAL_COMMAND = 0x04;

/** start data token for read or write single block*/

uint8_t const DATA_START_BLOCK = 0xFE;

/** stop token for write multiple blocks*/

uint8_t const STOP_TRAN_TOKEN = 0xFD;

/** start data token for write multiple blocks*/

uint8_t const WRITE_MULTIPLE_TOKEN = 0xFC;

/** mask for data response tokens after a write block operation */

uint8_t const DATA_RES_MASK = 0x1F;

/** write data accepted token */

uint8_t const DATA_RES_ACCEPTED = 0x05;

/** Card IDentification (CID) register */

typedef struct CID {

  // byte 0

  /** Manufacturer ID */

  unsigned char mid;

  // byte 1-2

  /** OEM/Application ID */

  char oid[2];

  // byte 3-7

  /** Product name */

  char pnm[5];

  // byte 8

  /** Product revision least significant digit */

  unsigned char prv_m : 4;

  /** Product revision most significant digit */

  unsigned char prv_n : 4;

  // byte 9-12

  /** Product serial number */

  uint32_t psn;

  // byte 13

  /** Manufacturing date year low digit */

  unsigned char mdt_year_high : 4;

  /** not used */

  unsigned char reserved : 4;

  // byte 14

  /** Manufacturing date month */

  unsigned char mdt_month : 4;

  /** Manufacturing date year low digit */

  unsigned char mdt_year_low : 4;

  // byte 15

  /** not used always 1 */

  unsigned char always1 : 1;

  /** CRC7 checksum */

  unsigned char crc : 7;

} cid_t;

/** CSD for version 1.00 cards */

typedef struct CSDV1 {

  // byte 0

  unsigned char reserved1 : 6;

  unsigned char csd_ver : 2;

  // byte 1

  unsigned char taac;

  // byte 2

  unsigned char nsac;

  // byte 3

  unsigned char tran_speed;

  // byte 4

  unsigned char ccc_high;

  // byte 5

  unsigned char read_bl_len : 4;

  unsigned char ccc_low : 4;

  // byte 6

  unsigned char c_size_high : 2;

  unsigned char reserved2 : 2;

  unsigned char dsr_imp : 1;

  unsigned char read_blk_misalign : 1;

  unsigned char write_blk_misalign : 1;

  unsigned char read_bl_partial : 1;

  // byte 7

  unsigned char c_size_mid;

  // byte 8

  unsigned char vdd_r_curr_max : 3;

  unsigned char vdd_r_curr_min : 3;

  unsigned char c_size_low : 2;

  // byte 9

  unsigned char c_size_mult_high : 2;

  unsigned char vdd_w_cur_max : 3;

  unsigned char vdd_w_curr_min : 3;

  // byte 10

  unsigned char sector_size_high : 6;

  unsigned char erase_blk_en : 1;

  unsigned char c_size_mult_low : 1;

  // byte 11

  unsigned char wp_grp_size : 7;

  unsigned char sector_size_low : 1;

  // byte 12

  unsigned char write_bl_len_high : 2;

  unsigned char r2w_factor : 3;

  unsigned char reserved3 : 2;

  unsigned char wp_grp_enable : 1;

  // byte 13

  unsigned char reserved4 : 5;

  unsigned char write_partial : 1;

  unsigned char write_bl_len_low : 2;

  // byte 14

  unsigned char reserved5: 2;

  unsigned char file_format : 2;

  unsigned char tmp_write_protect : 1;

  unsigned char perm_write_protect : 1;

  unsigned char copy : 1;

  /** Indicates the file format on the card */

  unsigned char file_format_grp : 1;

  // byte 15

  unsigned char always1 : 1;

  unsigned char crc : 7;

} csd1_t;

/** CSD for version 2.00 cards */

typedef struct CSDV2 {

  // byte 0

  unsigned char reserved1 : 6;

  unsigned char csd_ver : 2;

  // byte 1

  /** fixed to 0x0E */

  unsigned char taac;

  // byte 2

  /** fixed to 0 */

  unsigned char nsac;

  // byte 3

  unsigned char tran_speed;

  // byte 4

  unsigned char ccc_high;

  // byte 5

  /** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */

  unsigned char read_bl_len : 4;

  unsigned char ccc_low : 4;

  // byte 6

  /** not used */

  unsigned char reserved2 : 4;

  unsigned char dsr_imp : 1;

  /** fixed to 0 */

  unsigned char read_blk_misalign : 1;

  /** fixed to 0 */

  unsigned char write_blk_misalign : 1;

  /** fixed to 0 - no partial read */

  unsigned char read_bl_partial : 1;

  // byte 7

  /** not used */

  unsigned char reserved3 : 2;

  /** high part of card size */

  unsigned char c_size_high : 6;

  // byte 8

  /** middle part of card size */

  unsigned char c_size_mid;

  // byte 9

  /** low part of card size */

  unsigned char c_size_low;

  // byte 10

  /** sector size is fixed at 64 KB */

  unsigned char sector_size_high : 6;

  /** fixed to 1 - erase single is supported */

  unsigned char erase_blk_en : 1;

  /** not used */

  unsigned char reserved4 : 1;

  // byte 11

  unsigned char wp_grp_size : 7;

  /** sector size is fixed at 64 KB */

  unsigned char sector_size_low : 1;

  // byte 12

  /** write_bl_len fixed for 512 byte blocks */

  unsigned char write_bl_len_high : 2;

  /** fixed value of 2 */

  unsigned char r2w_factor : 3;

  /** not used */

  unsigned char reserved5 : 2;

  /** fixed value of 0 - no write protect groups */

  unsigned char wp_grp_enable : 1;

  // byte 13

  unsigned char reserved6 : 5;

  /** always zero - no partial block read*/

  unsigned char write_partial : 1;

  /** write_bl_len fixed for 512 byte blocks */

  unsigned char write_bl_len_low : 2;

  // byte 14

  unsigned char reserved7: 2;

  /** Do not use always 0 */

  unsigned char file_format : 2;

  unsigned char tmp_write_protect : 1;

  unsigned char perm_write_protect : 1;

  unsigned char copy : 1;

  /** Do not use always 0 */

  unsigned char file_format_grp : 1;

  // byte 15

  /** not used always 1 */

  unsigned char always1 : 1;

  /** checksum */

  unsigned char crc : 7;

} csd2_t;

/** union of old and new style CSD register */

union csd_t {

  csd1_t v1;

  csd2_t v2;

};

#endif // _SDINFO_H_