Subversion Repositories Tronxy-X3A-Marlin

/**

 * Marlin 3D Printer Firmware

 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

 *

 * Based on Sprinter and grbl.

 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

 *

 * This program is free software: you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation, either version 3 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

 *

 */

/**

 * German

 *

 * LCD Menu Messages

 * See also http://marlinfw.org/docs/development/lcd_language.html

 *

 */

#ifndef LANGUAGE_DE_H

#define LANGUAGE_DE_H

#define MAPPER_C2C3

#define DISPLAY_CHARSET_ISO10646_1

#define CHARSIZE 2

#define THIS_LANGUAGES_SPECIAL_SYMBOLS      _UxGT("ÄäÖöÜüß²³")

#define WELCOME_MSG                         MACHINE_NAME _UxGT(" bereit")

#define MSG_BACK                            _UxGT("Zurück")

#define MSG_SD_INSERTED                     _UxGT("SD-Karte erkannt")

#define MSG_SD_REMOVED                      _UxGT("SD-Karte entfernt")

#define MSG_LCD_ENDSTOPS                    _UxGT("Endstopp") // Max length 8 characters

#define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft-Endstopp")

#define MSG_MAIN                            _UxGT("Hauptmenü")

#define MSG_AUTOSTART                       _UxGT("Autostart")

#define MSG_DISABLE_STEPPERS                _UxGT("Motoren deaktivieren") // M84

#define MSG_DEBUG_MENU                      _UxGT("Debug-Menü")

#define MSG_PROGRESS_BAR_TEST               _UxGT("Statusbalken-Test")

#define MSG_AUTO_HOME                       _UxGT("Home XYZ") // G28

#define MSG_AUTO_HOME_X                     _UxGT("Home X")

#define MSG_AUTO_HOME_Y                     _UxGT("Home Y")

#define MSG_AUTO_HOME_Z                     _UxGT("Home Z")

#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibriere Z")

#define MSG_LEVEL_BED_HOMING                _UxGT("Home XYZ")

#define MSG_LEVEL_BED_WAITING               _UxGT("Klick zum Starten")

#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nächste Koordinate")

#define MSG_LEVEL_BED_DONE                  _UxGT("Nivellieren fertig!")

#define MSG_Z_FADE_HEIGHT                   _UxGT("Ausblendhöhe")

#define MSG_SET_HOME_OFFSETS                _UxGT("Setze Homeversatz")

#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Homeversatz aktiv")

#define MSG_SET_ORIGIN                      _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp

#define MSG_PREHEAT_1                       _UxGT("Vorwärmen PLA")

#define MSG_PREHEAT_1_N                     _UxGT("Vorwärmen PLA ")

#define MSG_PREHEAT_1_ALL                   _UxGT("Vorw. PLA Alles")

#define MSG_PREHEAT_1_END                   _UxGT("Vorw. PLA Extr.")

#define MSG_PREHEAT_1_BEDONLY               _UxGT("Vorw. PLA Bett")

#define MSG_PREHEAT_1_SETTINGS              _UxGT("Vorw. PLA Einst.")

#define MSG_PREHEAT_2                       _UxGT("Vorwärmen ABS")

#define MSG_PREHEAT_2_N                     _UxGT("Vorwärmen ABS ")

#define MSG_PREHEAT_2_ALL                   _UxGT("Vorw. ABS Alles")

#define MSG_PREHEAT_2_END                   _UxGT("Vorw. ABS Extr.")

#define MSG_PREHEAT_2_BEDONLY               _UxGT("Vorw. ABS Bett")

#define MSG_PREHEAT_2_SETTINGS              _UxGT("Vorw. ABS Einst.")

#define MSG_COOLDOWN                        _UxGT("Abkühlen")

#define MSG_SWITCH_PS_ON                    _UxGT("Netzteil ein")

#define MSG_SWITCH_PS_OFF                   _UxGT("Netzteil aus")

#define MSG_EXTRUDE                         _UxGT("Extrudieren")

#define MSG_RETRACT                         _UxGT("Rückzug")

#define MSG_MOVE_AXIS                       _UxGT("Achse Bewegen")

#define MSG_BED_LEVELING                    _UxGT("Bett-Nivellierung")

#define MSG_LEVEL_BED                       _UxGT("Bett nivellieren")

#define MSG_LEVEL_CORNERS                   _UxGT("Ecken nivellieren")

#define MSG_NEXT_CORNER                     _UxGT("Nächste Ecke")

#define MSG_EDITING_STOPPED                 _UxGT("Netzbearb. angeh.")

#define MSG_USER_MENU                       _UxGT("Benutzer-Menü")

#define MSG_UBL_DOING_G29                   _UxGT("G29 ausführen")

#define MSG_UBL_UNHOMED                     _UxGT("Home XYZ zuerst")

#define MSG_UBL_TOOLS                       _UxGT("UBL-Werkzeuge")

#define MSG_UBL_LEVEL_BED                   _UxGT("Unified Bed Leveling")

#define MSG_UBL_MANUAL_MESH                 _UxGT("Netz manuell erst.")

#define MSG_UBL_BC_INSERT                   _UxGT("Unterlegen & messen")

#define MSG_UBL_BC_INSERT2                  _UxGT("Messen")

#define MSG_UBL_BC_REMOVE                   _UxGT("Entfernen & messen")

#define MSG_UBL_MOVING_TO_NEXT              _UxGT("Nächster Punkt...")

#define MSG_UBL_ACTIVATE_MESH               _UxGT("UBL aktivieren")

#define MSG_UBL_DEACTIVATE_MESH             _UxGT("UBL deaktivieren")

#define MSG_UBL_SET_BED_TEMP                _UxGT("Betttemperatur")

#define MSG_UBL_CUSTOM_BED_TEMP             MSG_UBL_SET_BED_TEMP

#define MSG_UBL_SET_HOTEND_TEMP             _UxGT("Hotend-Temp.")

#define MSG_UBL_CUSTOM_HOTEND_TEMP          MSG_UBL_SET_HOTEND_TEMP

#define MSG_UBL_MESH_EDIT                   _UxGT("Netz bearbeiten")

#define MSG_UBL_EDIT_CUSTOM_MESH            _UxGT("Eigenes Netz bearb.")

#define MSG_UBL_FINE_TUNE_MESH              _UxGT("Feineinstellung...")

#define MSG_UBL_DONE_EDITING_MESH           _UxGT("Bearbeitung beendet")

#define MSG_UBL_BUILD_CUSTOM_MESH           _UxGT("Eigenes Netz erst.")

#define MSG_UBL_BUILD_MESH_MENU             _UxGT("Netz erstellen")

#define MSG_UBL_BUILD_PLA_MESH              _UxGT("Netz erstellen PLA")

#define MSG_UBL_BUILD_ABS_MESH              _UxGT("Netz erstellen ABS")

#define MSG_UBL_BUILD_COLD_MESH             _UxGT("Netz erstellen kalt")

#define MSG_UBL_MESH_HEIGHT_ADJUST          _UxGT("Netzhöhe einst.")

#define MSG_UBL_MESH_HEIGHT_AMOUNT          _UxGT("Höhe")

#define MSG_UBL_VALIDATE_MESH_MENU          _UxGT("Netz validieren")

#define MSG_UBL_VALIDATE_PLA_MESH           _UxGT("Netz validieren PLA")

#define MSG_UBL_VALIDATE_ABS_MESH           _UxGT("Netz validieren ABS")

#define MSG_UBL_VALIDATE_CUSTOM_MESH        _UxGT("Eig. Netz validieren")

#define MSG_UBL_CONTINUE_MESH               _UxGT("Netzerst. forts.")

#define MSG_UBL_MESH_LEVELING               _UxGT("Netz-Nivellierung")

#define MSG_UBL_3POINT_MESH_LEVELING        _UxGT("3-Punkt-Nivell.")

#define MSG_UBL_GRID_MESH_LEVELING          _UxGT("Gitternetz-Nivell.")

#define MSG_UBL_MESH_LEVEL                  _UxGT("Netz nivellieren")

#define MSG_UBL_SIDE_POINTS                 _UxGT("Eckpunkte")

#define MSG_UBL_MAP_TYPE                    _UxGT("Kartentyp")

#define MSG_UBL_OUTPUT_MAP                  _UxGT("Karte ausgeben")

#define MSG_UBL_OUTPUT_MAP_HOST             _UxGT("Ausgabe für Host")

#define MSG_UBL_OUTPUT_MAP_CSV              _UxGT("Ausgabe für CSV")

#define MSG_UBL_OUTPUT_MAP_BACKUP           _UxGT("Externe Sicherung")

#define MSG_UBL_INFO_UBL                    _UxGT("UBL-Info ausgeben")

#define MSG_UBL_EDIT_MESH_MENU             _UxGT("Netz bearbeiten")

#define MSG_UBL_FILLIN_AMOUNT               _UxGT("Menge an Füllung")

#define MSG_UBL_MANUAL_FILLIN               _UxGT("Manuelles Füllung")

#define MSG_UBL_SMART_FILLIN                _UxGT("Cleveres Füllen")

#define MSG_UBL_FILLIN_MESH                 _UxGT("Netz Füllen")

#define MSG_UBL_INVALIDATE_ALL              _UxGT("Alles annullieren")

#define MSG_UBL_INVALIDATE_CLOSEST          _UxGT("Nächstlieg. ann.")

#define MSG_UBL_FINE_TUNE_ALL               _UxGT("Feineinst. Alles")

#define MSG_UBL_FINE_TUNE_CLOSEST           _UxGT("Feineinst. Nächstl.")

#define MSG_UBL_STORAGE_MESH_MENU           _UxGT("Netz-Speicherplatz")

#define MSG_UBL_STORAGE_SLOT                _UxGT("Speicherort")

#define MSG_UBL_LOAD_MESH                   _UxGT("Bettnetz laden")

#define MSG_UBL_SAVE_MESH                   _UxGT("Bettnetz speichern")

#define MSG_MESH_LOADED                     _UxGT("Netz %i geladen")

#define MSG_MESH_SAVED                      _UxGT("Netz %i gespeichert")

#define MSG_NO_STORAGE                      _UxGT("Kein Speicher")

#define MSG_UBL_SAVE_ERROR                  _UxGT("ERR:UBL speichern")

#define MSG_UBL_RESTORE_ERROR               _UxGT("ERR:UBL wiederherst.")

#define MSG_UBL_Z_OFFSET_STOPPED            _UxGT("Z-Versatz angehalten")

#define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("Schrittweises UBL")

#define MSG_LED_CONTROL                     _UxGT("LED-Steuerung")

#define MSG_LEDS                            _UxGT("Licht")

#define MSG_LED_PRESETS                     _UxGT("Licht-Einstellungen")

#define MSG_SET_LEDS_RED                    _UxGT("Rot")

#define MSG_SET_LEDS_ORANGE                 _UxGT("Orange")

#define MSG_SET_LEDS_YELLOW                 _UxGT("Gelb")

#define MSG_SET_LEDS_GREEN                  _UxGT("Grün")

#define MSG_SET_LEDS_BLUE                   _UxGT("Blau")

#define MSG_SET_LEDS_INDIGO                 _UxGT("Indigo")

#define MSG_SET_LEDS_VIOLET                 _UxGT("Violett")

#define MSG_SET_LEDS_WHITE                  _UxGT("Weiß")

#define MSG_SET_LEDS_DEFAULT                _UxGT("Standard")

#define MSG_CUSTOM_LEDS                     _UxGT("Benutzerdef.")

#define MSG_INTENSITY_R                     _UxGT("Intensität Rot")

#define MSG_INTENSITY_G                     _UxGT("Intensität Grün")

#define MSG_INTENSITY_B                     _UxGT("Intensität Blau")

#define MSG_INTENSITY_W                     _UxGT("Intensität Weiß")

#define MSG_LED_BRIGHTNESS                  _UxGT("Helligkeit")

#define MSG_MOVING                          _UxGT("In Bewegung...")

#define MSG_FREE_XY                         _UxGT("Abstand XY")

#define MSG_MOVE_X                          _UxGT("Bewege X")

#define MSG_MOVE_Y                          _UxGT("Bewege Y")

#define MSG_MOVE_Z                          _UxGT("Bewege Z")

#define MSG_MOVE_E                          _UxGT("Bewege Extruder")

#define MSG_MOVE_01MM                       _UxGT(" 0,1 mm")

#define MSG_MOVE_1MM                        _UxGT(" 1,0 mm")

#define MSG_MOVE_10MM                       _UxGT("10,0 mm")

#define MSG_SPEED                           _UxGT("Geschw.")

#define MSG_BED_Z                           _UxGT("Bett Z")

#define MSG_NOZZLE                          _UxGT("Düse")

#define MSG_BED                             _UxGT("Bett")

#define MSG_FAN_SPEED                       _UxGT("Lüfter")

#define MSG_EXTRA_FAN_SPEED                 _UxGT("Geschw. Extralüfter")

#define MSG_FLOW                            _UxGT("Flussrate")

#define MSG_CONTROL                         _UxGT("Einstellungen")

#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" min")

#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" max")

#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Faktor")

#define MSG_AUTOTEMP                        _UxGT("Auto Temperatur")

#define MSG_ON                              _UxGT("Ein")

#define MSG_OFF                             _UxGT("Aus")

#define MSG_PID_P                           _UxGT("PID P")

#define MSG_PID_I                           _UxGT("PID I")

#define MSG_PID_D                           _UxGT("PID D")

#define MSG_PID_C                           _UxGT("PID C")

#define MSG_SELECT                          _UxGT("Auswählen")

#define MSG_ACC                             _UxGT("Beschleunigung")

#define MSG_JERK                            _UxGT("Jerk")

#if IS_KINEMATIC

  #define MSG_VA_JERK                       _UxGT("V A Jerk")

  #define MSG_VB_JERK                       _UxGT("V B Jerk")

  #define MSG_VC_JERK                       _UxGT("V C Jerk")

#else

  #define MSG_VA_JERK                       _UxGT("V X Jerk")

  #define MSG_VB_JERK                       _UxGT("V Y Jerk")

  #define MSG_VC_JERK                       _UxGT("V Z Jerk")

#endif

#define MSG_VE_JERK                         _UxGT("V E Jerk")

#define MSG_JUNCTION_DEVIATION              _UxGT("Junction Dev")

#define MSG_VELOCITY                        _UxGT("Geschwindigkeit")

#define MSG_VMAX                            _UxGT("V max ") // space intentional

#define MSG_VMIN                            _UxGT("V min")

#define MSG_VTRAV_MIN                       _UxGT("V min Leerfahrt")

#define MSG_ACCELERATION                    _UxGT("Beschleunigung")

#define MSG_AMAX                            _UxGT("A max ") // space intentional

#define MSG_A_RETRACT                       _UxGT("A Rückzug")

#define MSG_A_TRAVEL                        _UxGT("A Leerfahrt")

#define MSG_STEPS_PER_MM                    _UxGT("Steps/mm")

#if IS_KINEMATIC

  #define MSG_ASTEPS                        _UxGT("A Steps/mm")

  #define MSG_BSTEPS                        _UxGT("B Steps/mm")

  #define MSG_CSTEPS                        _UxGT("C Steps/mm")

#else

  #define MSG_ASTEPS                        _UxGT("X Steps/mm")

  #define MSG_BSTEPS                        _UxGT("Y Steps/mm")

  #define MSG_CSTEPS                        _UxGT("Z Steps/mm")

#endif

#define MSG_ESTEPS                          _UxGT("E Steps/mm")

#define MSG_E1STEPS                         _UxGT("E1 Steps/mm")

#define MSG_E2STEPS                         _UxGT("E2 Steps/mm")

#define MSG_E3STEPS                         _UxGT("E3 Steps/mm")

#define MSG_E4STEPS                         _UxGT("E4 Steps/mm")

#define MSG_E5STEPS                         _UxGT("E5 Steps/mm")

#define MSG_TEMPERATURE                     _UxGT("Temperatur")

#define MSG_MOTION                          _UxGT("Bewegung")

#define MSG_FILAMENT                        _UxGT("Filament")

#define MSG_VOLUMETRIC_ENABLED              _UxGT("E in mm³")

#define MSG_FILAMENT_DIAM                   _UxGT("Durchm. Filament")

#define MSG_FILAMENT_UNLOAD                 _UxGT("Entladen mm")

#define MSG_FILAMENT_LOAD                   _UxGT("Laden mm")

#define MSG_ADVANCE_K                       _UxGT("Vorschubfaktor")

#define MSG_CONTRAST                        _UxGT("LCD-Kontrast")

#define MSG_STORE_EEPROM                    _UxGT("Konfig. speichern")

#define MSG_LOAD_EEPROM                     _UxGT("Konfig. laden")

#define MSG_RESTORE_FAILSAFE                _UxGT("Standardwerte laden")

#define MSG_INIT_EEPROM                     _UxGT("Werkseinstellungen")

#define MSG_REFRESH                         _UxGT("Aktualisieren")

#define MSG_WATCH                           _UxGT("Info")

#define MSG_PREPARE                         _UxGT("Vorbereitung")

#define MSG_TUNE                            _UxGT("Justierung")

#define MSG_PAUSE_PRINT                     _UxGT("SD-Druck pausieren")

#define MSG_RESUME_PRINT                    _UxGT("SD-Druck fortsetzen")

#define MSG_STOP_PRINT                      _UxGT("SD-Druck abbrechen")

#define MSG_POWER_LOSS_RECOVERY             _UxGT("Wiederh. n. Stroma.")

#define MSG_CARD_MENU                       _UxGT("Druck v. SD-Karte")

#define MSG_NO_CARD                         _UxGT("Keine SD-Karte")

#define MSG_DWELL                           _UxGT("Warten...")

#define MSG_USERWAIT                        _UxGT("Klick zum Fortsetzen")

#define MSG_PRINT_PAUSED                    _UxGT("Druck pausiert...")

#define MSG_PRINTING                        _UxGT("Druckt...")

#define MSG_PRINT_ABORTED                   _UxGT("Druck abgebrochen")

#define MSG_NO_MOVE                         _UxGT("Motoren angeschaltet")

#define MSG_KILLED                          _UxGT("ABGEBROCHEN")

#define MSG_STOPPED                         _UxGT("ANGEHALTEN")

#define MSG_CONTROL_RETRACT                 _UxGT("Rückzug mm")

#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Wechs. Rückzug mm")

#define MSG_CONTROL_RETRACTF                _UxGT("Rückzug  V")

#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Z-Sprung mm")

#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("UnRet mm")

#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Wechs. UnRet mm")

#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")

#define MSG_CONTROL_RETRACT_RECOVER_SWAPF   _UxGT("S UnRet V")

#define MSG_AUTORETRACT                     _UxGT("Autom. Rückzug")

#define MSG_FILAMENTCHANGE                  _UxGT("Filament wechseln")

#define MSG_FILAMENTLOAD                    _UxGT("Filament laden")

#define MSG_FILAMENTUNLOAD                  _UxGT("Filament entladen")

#define MSG_FILAMENTUNLOAD_ALL              _UxGT("Alles entladen")

#define MSG_INIT_SDCARD                     _UxGT("SD-Karte initialisi.")  // Manually initialize the SD-card via user interface

#define MSG_CNG_SDCARD                      _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"

#define MSG_ZPROBE_OUT                      _UxGT("Z-Sonde außerhalb")

#define MSG_SKEW_FACTOR                     _UxGT("Korrekturfaktor")

#define MSG_BLTOUCH                         _UxGT("BLTouch")

#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Selbsttest")

#define MSG_BLTOUCH_RESET                   _UxGT("BLTouch zurücks.")

#define MSG_BLTOUCH_DEPLOY                  _UxGT("BLTouch ausfahren")

#define MSG_BLTOUCH_STOW                    _UxGT("BLTouch einfahren")

#define MSG_HOME                            _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

#define MSG_FIRST                           _UxGT("homen")

#define MSG_ZPROBE_ZOFFSET                  _UxGT("Sondenversatz Z")

#define MSG_BABYSTEP_X                      _UxGT("Babystep X")

#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")

#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")

#define MSG_ENDSTOP_ABORT                   _UxGT("Endstopp Abbr.")

#define MSG_HEATING_FAILED_LCD              _UxGT("HEIZEN ERFOLGLOS")

#define MSG_HEATING_FAILED_LCD_BED          _UxGT("Bett heizen fehlge.")

#define MSG_ERR_REDUNDANT_TEMP              _UxGT("REDUND. TEMP-ABWEI.")

#define MSG_THERMAL_RUNAWAY                 LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")

#define MSG_THERMAL_RUNAWAY_BED             _UxGT("BETT") MSG_THERMAL_RUNAWAY

#define MSG_ERR_MAXTEMP                     LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")

#define MSG_ERR_MINTEMP                     LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")

#define MSG_ERR_MAXTEMP_BED                 _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")

#define MSG_ERR_MINTEMP_BED                 _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")

#define MSG_ERR_Z_HOMING                    MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST

#define MSG_HALTED                          _UxGT("DRUCKER STOPP")

#define MSG_PLEASE_RESET                    _UxGT("Bitte neustarten")

#define MSG_SHORT_DAY                       _UxGT("t") // One character only

#define MSG_SHORT_HOUR                      _UxGT("h") // One character only

#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only

#define MSG_HEATING                         _UxGT("Extr. heizt...")

#define MSG_COOLING                         _UxGT("Extr. kühlt...")

#define MSG_BED_HEATING                     _UxGT("Bett heizt...")

#define MSG_BED_COOLING                     _UxGT("Bett kühlt...")

#define MSG_DELTA_CALIBRATE                 _UxGT("Delta kalibrieren")

#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibriere X")

#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibriere Y")

#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibriere Z")

#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibriere Mitte")

#define MSG_DELTA_SETTINGS                  _UxGT("Delta Einst. anzeig.")

#define MSG_DELTA_AUTO_CALIBRATE            _UxGT("Autom. Kalibrierung")

#define MSG_DELTA_HEIGHT_CALIBRATE          _UxGT("Delta Höhe setzen")

#define MSG_DELTA_Z_OFFSET_CALIBRATE        _UxGT("Sondenversatz Z")

#define MSG_DELTA_DIAG_ROD                  _UxGT("Diag Rod")

#define MSG_DELTA_HEIGHT                    _UxGT("Höhe")

#define MSG_DELTA_RADIUS                    _UxGT("Radius")

#define MSG_INFO_MENU                       _UxGT("Über den Drucker")

#define MSG_INFO_PRINTER_MENU               _UxGT("Drucker-Info")

#define MSG_3POINT_LEVELING                 _UxGT("3-Punkt-Nivellierung")

#define MSG_LINEAR_LEVELING                 _UxGT("Lineare Nivellierung")

#define MSG_BILINEAR_LEVELING               _UxGT("Bilineare Nivell.")

#define MSG_UBL_LEVELING                    _UxGT("Unified Bed Leveling")

#define MSG_MESH_LEVELING                   _UxGT("Netz-Nivellierung")

#define MSG_INFO_STATS_MENU                 _UxGT("Drucker-Statistik")

#define MSG_INFO_BOARD_MENU                 _UxGT("Board-Info")

#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistoren")

#define MSG_INFO_EXTRUDERS                  _UxGT("Extruder")

#define MSG_INFO_BAUDRATE                   _UxGT("Baudrate")

#define MSG_INFO_PROTOCOL                   _UxGT("Protokoll")

#define MSG_CASE_LIGHT                      _UxGT("Beleuchtung")

#define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Helligkeit")

#if LCD_WIDTH >= 20

  #define MSG_INFO_PRINT_COUNT              _UxGT("Gesamte Drucke")

  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplette Drucke")

  #define MSG_INFO_PRINT_TIME               _UxGT("Gesamte Druckzeit")

  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längste Druckzeit")

  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Gesamt Extrudiert")

#else

  #define MSG_INFO_PRINT_COUNT              _UxGT("Drucke")

  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplette")

  #define MSG_INFO_PRINT_TIME               _UxGT("Gesamte")

  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längste")

  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extrud.")

#endif

#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")

#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")

#define MSG_INFO_PSU                        _UxGT("Netzteil")

#define MSG_DRIVE_STRENGTH                  _UxGT("Motorleistung")

#define MSG_DAC_PERCENT                     _UxGT("Treiber %")

#define MSG_DAC_EEPROM_WRITE                _UxGT("Werte speichern")

#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("DRUCK PAUSIERT")

#define MSG_FILAMENT_CHANGE_HEADER_LOAD     _UxGT("FILAMENT LADEN")

#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD   _UxGT("FILAMENT ENTLADEN")

#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("FORTS. OPTIONEN:")

#define MSG_FILAMENT_CHANGE_OPTION_PURGE    _UxGT("Mehr entladen")

#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Druck weiter")

#define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Düse: ")

#define MSG_ERR_HOMING_FAILED               _UxGT("Homing gescheitert")

#define MSG_ERR_PROBING_FAILED              _UxGT("Probing gescheitert")

#define MSG_M600_TOO_COLD                   _UxGT("M600: zu kalt")

//

// Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen

//                                       ...oder 2 Zeilen auf einem 3-Zeilen-Display.

#if LCD_HEIGHT >= 4

  // Up to 3 lines allowed

  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Warte auf den")

  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("Start des")

  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("Filamentwechsels...")

  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Filament einlegen")

  #define MSG_FILAMENT_CHANGE_INSERT_2      _UxGT("und Knopf drücken")

  #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("um fortzusetzen")

  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("Knopf drücken um")

  #define MSG_FILAMENT_CHANGE_HEAT_2        _UxGT("Düse aufzuheizen")

  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Düse heizt auf")

  #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("bitte warten...")

  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Warte auf")

  #define MSG_FILAMENT_CHANGE_UNLOAD_2      _UxGT("Herausnahme")

  #define MSG_FILAMENT_CHANGE_UNLOAD_3      _UxGT("des Filaments...")

  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Warte auf")

  #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("Laden des")

  #define MSG_FILAMENT_CHANGE_LOAD_3        _UxGT("Filaments...")

  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Warte auf")

  #define MSG_FILAMENT_CHANGE_PURGE_2       _UxGT("Entladen des")

  #define MSG_FILAMENT_CHANGE_PURGE_3       _UxGT("Filaments...")

  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Warte auf")

  #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("Fortsetzen des")

  #define MSG_FILAMENT_CHANGE_RESUME_3      _UxGT("Drucks...")

#else // LCD_HEIGHT < 4

  // Up to 2 lines allowed

  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Bitte warten...")

  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Laden und Klick")

  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("Klick zum Heizen")

  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Heizen...")

  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Entladen...")

  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Laden...")

  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Entladen...")

  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Fortsetzen...")

#endif // LCD_HEIGHT < 4

#endif // LANGUAGE_DE_H