Subversion Repositories Tronxy-X3A-Marlin

/**

 * Marlin 3D Printer Firmware

 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

 *

 * Based on Sprinter and grbl.

 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

 *

 * This program is free software: you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation, either version 3 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

 *

 */

/**

 * Polish for DOGM display - includes accented characters

 */

#ifndef LANGUAGE_PL_DOGM_H

#define LANGUAGE_PL_DOGM_H

#define CHARSIZE 2

#define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")

#define MSG_SD_INSERTED                     _UxGT("Karta włożona")

#define MSG_SD_REMOVED                      _UxGT("Karta usunięta")

#define MSG_LCD_ENDSTOPS                    _UxGT("Kranców.") // Max length 8 characters

#define MSG_MAIN                            _UxGT("Menu główne")

#define MSG_AUTOSTART                       _UxGT("Autostart")

#define MSG_DISABLE_STEPPERS                _UxGT("Wyłącz silniki")

#define MSG_AUTO_HOME                       _UxGT("Pozycja zerowa")

#define MSG_AUTO_HOME_X                     _UxGT("Zeruj X")

#define MSG_AUTO_HOME_Y                     _UxGT("Zeruj Y")

#define MSG_AUTO_HOME_Z                     _UxGT("Zeruj Z")

#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibruj Z")

#define MSG_LEVEL_BED                       _UxGT("Poziom. stołu")

#define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")

#define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")

#define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Następny punkt")

#define MSG_LEVEL_BED_DONE                  _UxGT("Wypoziomowano!")

#define MSG_USER_MENU                       _UxGT("Własne Polecenia")

#define MSG_SET_HOME_OFFSETS                _UxGT("Ust. poz. zer.")

#define MSG_HOME_OFFSETS_APPLIED            _UxGT("Poz. zerowa ust.")

#define MSG_SET_ORIGIN                      _UxGT("Ustaw punkt zero")

#define MSG_PREHEAT_1                       _UxGT("Rozgrzej PLA")

#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 _UxGT(" ")

#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 _UxGT(" wsz.")

#define MSG_PREHEAT_1_BEDONLY               _UxGT("Rozgrzej stół PLA")

#define MSG_PREHEAT_1_SETTINGS              _UxGT("Ustaw. rozg. PLA")

#define MSG_PREHEAT_2                       _UxGT("Rozgrzej ABS")

#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 _UxGT(" ")

#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 _UxGT(" wsz.")

#define MSG_PREHEAT_2_BEDONLY               _UxGT("Rozgrzej stół ABS")

#define MSG_PREHEAT_2_SETTINGS              _UxGT("Ustaw. rozg. ABS")

#define MSG_COOLDOWN                        _UxGT("Chłodzenie")

#define MSG_SWITCH_PS_ON                    _UxGT("Włącz zasilacz")

#define MSG_SWITCH_PS_OFF                   _UxGT("Wyłącz zasilacz")

#define MSG_EXTRUDE                         _UxGT("Ekstruzja")

#define MSG_RETRACT                         _UxGT("Wycofanie")

#define MSG_MOVE_AXIS                       _UxGT("Ruch osi")

#define MSG_BED_LEVELING                    _UxGT("Poziom. stołu")

#define MSG_MOVE_X                          _UxGT("Przesuń w X")

#define MSG_MOVE_Y                          _UxGT("Przesuń w Y")

#define MSG_MOVE_Z                          _UxGT("Przesuń w Z")

#define MSG_MOVE_E                          _UxGT("Ekstruzja (os E)")

#define MSG_MOVE_01MM                       _UxGT("Przesuń co .1mm")

#define MSG_MOVE_1MM                        _UxGT("Przesuń co 1mm")

#define MSG_MOVE_10MM                       _UxGT("Przesuń co 10mm")

#define MSG_SPEED                           _UxGT("Predkość")

#define MSG_BED_Z                           _UxGT("Stół Z")

#define MSG_NOZZLE                          _UxGT("Dysza")

#define MSG_BED                             _UxGT("Stół")

#define MSG_FAN_SPEED                       _UxGT("Obroty wiatraka")

#define MSG_FLOW                            _UxGT("Przepływ")

#define MSG_CONTROL                         _UxGT("Ustawienia")

#define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" Min")

#define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" Max")

#define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Mnożnik")

#define MSG_AUTOTEMP                        _UxGT("Auto. temperatura")

#define MSG_ON                              _UxGT("Wł. ")

#define MSG_OFF                             _UxGT("Wył.")

#define MSG_PID_P                           _UxGT("PID-P")

#define MSG_PID_I                           _UxGT("PID-I")

#define MSG_PID_D                           _UxGT("PID-D")

#define MSG_PID_C                           _UxGT("PID-C")

#define MSG_SELECT                          _UxGT("Select")

#define MSG_ACC                             _UxGT("Przyśpieszenie")

#define MSG_JERK                            _UxGT("Zryw")

#if IS_KINEMATIC

  #define MSG_VA_JERK                       _UxGT("Zryw Va")

  #define MSG_VB_JERK                       _UxGT("Zryw Vb")

  #define MSG_VC_JERK                       _UxGT("Zryw Vc")

#else

  #define MSG_VA_JERK                       _UxGT("Zryw Vx")

  #define MSG_VB_JERK                       _UxGT("Zryw Vy")

  #define MSG_VC_JERK                       _UxGT("Zryw Vz")

#endif

#define MSG_VE_JERK                         _UxGT("Zryw Ve")

#define MSG_VMAX                            _UxGT("Vmax ")

#define MSG_VMIN                            _UxGT("Vmin")

#define MSG_VTRAV_MIN                       _UxGT("Vskok min")

#define MSG_ACCELERATION                    MSG_ACC

#define MSG_AMAX                            _UxGT("Amax")

#define MSG_A_RETRACT                       _UxGT("A-wycofanie")

#define MSG_A_TRAVEL                        _UxGT("A-przesuń.")

#define MSG_STEPS_PER_MM                    _UxGT("kroki/mm")

#if IS_KINEMATIC

  #define MSG_ASTEPS                        _UxGT("krokiA/mm")

  #define MSG_BSTEPS                        _UxGT("krokiB/mm")

  #define MSG_CSTEPS                        _UxGT("krokiC/mm")

#else

  #define MSG_ASTEPS                        _UxGT("krokiX/mm")

  #define MSG_BSTEPS                        _UxGT("krokiY/mm")

  #define MSG_CSTEPS                        _UxGT("krokiZ/mm")

#endif

#define MSG_ESTEPS                          _UxGT("krokiE/mm")

#define MSG_E1STEPS                         _UxGT("krokiE1/mm")

#define MSG_E2STEPS                         _UxGT("krokiE2/mm")

#define MSG_E3STEPS                         _UxGT("krokiE3/mm")

#define MSG_E4STEPS                         _UxGT("krokiE4/mm")

#define MSG_E5STEPS                         _UxGT("krokiE5/mm")

#define MSG_TEMPERATURE                     _UxGT("Temperatura")

#define MSG_MOTION                          _UxGT("Ruch")

#define MSG_FILAMENT                        _UxGT("Filament")

#define MSG_VOLUMETRIC_ENABLED              _UxGT("E w mm3")

#define MSG_FILAMENT_DIAM                   _UxGT("Śr. fil.")

#define MSG_CONTRAST                        _UxGT("Kontrast LCD")

#define MSG_STORE_EEPROM                    _UxGT("Zapisz w pamięci")

#define MSG_LOAD_EEPROM                     _UxGT("Wczytaj z pamięci")

#define MSG_RESTORE_FAILSAFE                _UxGT("Ustaw. fabryczne")

#define MSG_REFRESH                         _UxGT("Odswież")

#define MSG_WATCH                           _UxGT("Ekran główny")

#define MSG_PREPARE                         _UxGT("Przygotuj")

#define MSG_TUNE                            _UxGT("Strojenie")

#define MSG_PAUSE_PRINT                     _UxGT("Pauza")

#define MSG_RESUME_PRINT                    _UxGT("Wznowienie")

#define MSG_STOP_PRINT                      _UxGT("Stop")

#define MSG_CARD_MENU                       _UxGT("Karta SD")

#define MSG_NO_CARD                         _UxGT("Brak karty")

#define MSG_DWELL                           _UxGT("Uśpij...")

#define MSG_USERWAIT                        _UxGT("Oczekiwanie...")

#define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")

#define MSG_NO_MOVE                         _UxGT("Brak ruchu")

#define MSG_KILLED                          _UxGT("Ubity. ")

#define MSG_STOPPED                         _UxGT("Zatrzymany. ")

#define MSG_CONTROL_RETRACT                 _UxGT("Wycofaj mm")

#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Z Wycof. mm")

#define MSG_CONTROL_RETRACTF                _UxGT("Wycofaj  V")

#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Skok Z mm")

#define MSG_CONTROL_RETRACT_RECOVER         _UxGT("Cof. wycof. mm")

#define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Z Cof. wyc. mm")

#define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")

#define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")

#define MSG_FILAMENTCHANGE                  _UxGT("Zmień filament")

#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")

#define MSG_CNG_SDCARD                      _UxGT("Zmiana karty SD")

#define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stołem")

#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")

#define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

#define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

#define MSG_FIRST                           _UxGT("first")

#define MSG_ZPROBE_ZOFFSET                  _UxGT("Offset Z")

#define MSG_BABYSTEP_X                      _UxGT("Babystep X")

#define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")

#define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")

#define MSG_ENDSTOP_ABORT                   _UxGT("Błąd krańcówki")

#define MSG_HEATING_FAILED_LCD              _UxGT("Rozgrz. nieudane")

#define MSG_ERR_REDUNDANT_TEMP              _UxGT("Błąd temperatury")

#define MSG_THERMAL_RUNAWAY                 _UxGT("Zanik temp.")

#define MSG_ERR_MAXTEMP                     _UxGT("Err max temp")

#define MSG_ERR_MINTEMP                     _UxGT("Err min temp")

#define MSG_ERR_MAXTEMP_BED                 _UxGT("Err max temp stołu")

#define MSG_ERR_MINTEMP_BED                 _UxGT("Err min temp stołu")

#define MSG_ERR_Z_HOMING                    MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST

#define MSG_HALTED                          _UxGT("Drukarka zatrzym.")

#define MSG_PLEASE_RESET                    _UxGT("Proszę zresetować")

#define MSG_SHORT_DAY                       _UxGT("d") // One character only

#define MSG_SHORT_HOUR                      _UxGT("g") // One character only

#define MSG_SHORT_MINUTE                    _UxGT("m") // One character only

#define MSG_HEATING                         _UxGT("Rozgrzewanie...")

#define MSG_BED_HEATING                     _UxGT("Rozgrzewanie stołu...")

#define MSG_DELTA_CALIBRATE                 _UxGT("Kalibrowanie Delty")

#define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibruj X")

#define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibruj Y")

#define MSG_DELTA_CALIBRATE_Z               _UxGT("Kalibruj Z")

#define MSG_DELTA_CALIBRATE_CENTER          _UxGT("Kalibruj środek")

#define MSG_INFO_MENU                       _UxGT("O drukarce")

#define MSG_INFO_PRINTER_MENU               _UxGT("Info drukarki")

#define MSG_INFO_STATS_MENU                 _UxGT("Statystyki")

#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")

#define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistory")

#define MSG_INFO_EXTRUDERS                  _UxGT("Ekstrudery")

#define MSG_INFO_BAUDRATE                   _UxGT("Predkość USB")

#define MSG_INFO_PROTOCOL                   _UxGT("Protokół")

#define MSG_CASE_LIGHT                      _UxGT("Oświetlenie")

#if LCD_WIDTH >= 20

  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")

  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")

  #define MSG_INFO_PRINT_TIME               _UxGT("Czas druku")

  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdł. druk")

  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Użyty fil.")

#else

  #define MSG_INFO_PRINT_COUNT              _UxGT("Wydrukowano")

  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Ukończono")

  #define MSG_INFO_PRINT_TIME               _UxGT("Razem")

  #define MSG_INFO_PRINT_LONGEST            _UxGT("Najdł. druk")

  #define MSG_INFO_PRINT_FILAMENT           _UxGT("Użyty fil.")

#endif

#define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")

#define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")

#define MSG_INFO_PSU                        _UxGT("Zasilacz")

#define MSG_DRIVE_STRENGTH                  _UxGT("Siła silnika")

#define MSG_DAC_PERCENT                     _UxGT("Siła %")

#define MSG_DAC_EEPROM_WRITE                _UxGT("Zapisz DAC EEPROM")

#define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("ZMIEŃ FILAMENT")

#define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("ZMIEŃ OPCJE:")

#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Wznów drukowanie")

#if LCD_HEIGHT >= 4

  // Up to 3 lines allowed

  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Czekam na ")

  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("zmianę filamentu")

  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Czekam na")

  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("wyjęcie filamentu")

  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóz filament")

  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("i naciśnij przycisk")

  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("aby kontynuować...")

  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Czekam na")

  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("włożenie filamentu")

  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Czekam na")

  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("wznowienie druku")

#else // LCD_HEIGHT < 4

  // Up to 2 lines allowed

  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Proszę czekać...")

  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Wysuwanie...")

  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Włóż i naciśnij prz.")

  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Ładowanie...")

  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Wznowienie...")

#endif // LCD_HEIGHT < 4

#endif  // LANGUAGE_PL_DOGM_H