Subversion Repositories Tronxy-X3A-Marlin

/**

 * Marlin 3D Printer Firmware

 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

 *

 * Based on Sprinter and grbl.

 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

 *

 * This program is free software: you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation, either version 3 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

 *

 */

/**

 * Cheaptronic v2.0 pin assignments

 * Built and sold by Michal Dyntar - RRO

 *          www.reprapobchod.cz

 */

#ifndef __AVR_ATmega2560__

  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."

#endif

#define BOARD_NAME         "Cheaptronic v2.0"

//

// Limit Switches

//

#define X_MIN_PIN          30

#define X_MAX_PIN          31

#define Y_MIN_PIN          32

#define Y_MAX_PIN          33

#define Z_MIN_PIN          34

#define Z_MAX_PIN          35

//

// Steppers

//

#define X_STEP_PIN         17

#define X_DIR_PIN          16

#define X_ENABLE_PIN       48

#define Y_STEP_PIN         54

#define Y_DIR_PIN          47

#define Y_ENABLE_PIN       55

#define Z_STEP_PIN         57

#define Z_DIR_PIN          56

#define Z_ENABLE_PIN       62

#define E0_STEP_PIN        23

#define E0_DIR_PIN         22

#define E0_ENABLE_PIN      24

#define E1_STEP_PIN        26

#define E1_DIR_PIN         25

#define E1_ENABLE_PIN      27

#define E2_STEP_PIN        29

#define E2_DIR_PIN         28

#define E2_ENABLE_PIN      39

//

// Temperature sensors

//

#define TEMP_0_PIN         15

#define TEMP_1_PIN         13

#define TEMP_2_PIN         14

#define TEMP_3_PIN         11   // should be used for chamber temperature control

#define TEMP_BED_PIN       12

//

// Heaters / Fans

//

#define HEATER_0_PIN        6

#define HEATER_1_PIN        7

#define HEATER_2_PIN        8

#define HEATER_BED_PIN      9

#ifndef FAN_PIN

  #define FAN_PIN           3

#endif

#define FAN2_PIN           58   // additional fan or light control output

//

// Other board specific pins

//

#ifndef FIL_RUNOUT_PIN

  #define FIL_RUNOUT_PIN   37   // board input labeled as F-DET

#endif

#define Z_MIN_PROBE_PIN    36   // additional external board input labeled as E-SENS (should be used for Z-probe)

#define LED_PIN            13

#define SPINDLE_ENABLE_PIN  4   // additional PWM pin 1 at JP1 connector - should be used for laser control too

#define EXT_2               5   // additional PWM pin 2 at JP1 connector

#define EXT_3               2   // additional PWM pin 3 at JP1 connector

#define PS_ON_PIN          45

#define KILL_PIN           46

#ifndef FILWIDTH_PIN

  #define FILWIDTH_PIN     11   // shared with TEMP_3 analog input

#endif

//

// LCD

//

#define LCD_PINS_RS        19

#define LCD_PINS_ENABLE    42

#define LCD_PINS_D4        18

#define LCD_PINS_D5        38

#define LCD_PINS_D6        41

#define LCD_PINS_D7        40

//

// SD CARD, ROTARY ENCODER, BEEPER

//

#define SDPOWER            -1

#define SDSS               53

#define SD_DETECT_PIN      49

#define BEEPER_PIN         44

#define BTN_EN1            11

#define BTN_EN2            12

#define BTN_ENC            43