Blame | Last modification | View Log | RSS feed
/*** Marlin 3D Printer Firmware* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]** Based on Sprinter and grbl.* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm** This program is free software: you can redistribute it and/or modify* it under the terms of the GNU General Public License as published by* the Free Software Foundation, either version 3 of the License, or* (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program. If not, see <http://www.gnu.org/licenses/>.**//*** French** LCD Menu Messages* See also http://marlinfw.org/docs/development/lcd_language.html**/#ifndef LANGUAGE_FR_H#define LANGUAGE_FR_H#define MAPPER_NON#define NOT_EXTENDED_ISO10646_1_5X7#define WELCOME_MSG MACHINE_NAME _UxGT(" prete.")#define MSG_BACK _UxGT("Retour")#define MSG_SD_INSERTED _UxGT("Carte inseree")#define MSG_SD_REMOVED _UxGT("Carte retiree")#define MSG_LCD_ENDSTOPS _UxGT("Butees") // Max length 8 characters#define MSG_MAIN _UxGT("Menu principal")#define MSG_AUTOSTART _UxGT("Demarrage auto")#define MSG_DISABLE_STEPPERS _UxGT("Arreter moteurs")#define MSG_DEBUG_MENU _UxGT("Menu debug")#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.")#define MSG_AUTO_HOME _UxGT("Origine auto.")#define MSG_AUTO_HOME_X _UxGT("Origine X Auto.")#define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.")#define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.")#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrer Z")#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ")#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer")#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant")#define MSG_LEVEL_BED_DONE _UxGT("Mise a niveau OK!")#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissee")#define MSG_SET_HOME_OFFSETS _UxGT("Regl. decal. origine")#define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalages appliques")#define MSG_SET_ORIGIN _UxGT("Regler origine")#define MSG_PREHEAT_1 _UxGT("Prechauffage PLA")#define MSG_PREHEAT_1_N _UxGT("Prechauff. PLA ")#define MSG_PREHEAT_1_ALL _UxGT("Prech. PLA Tout")#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse")#define MSG_PREHEAT_1_BEDONLY _UxGT("Prech. PLA lit")#define MSG_PREHEAT_1_SETTINGS _UxGT("Regl. prech. PLA")#define MSG_PREHEAT_2 _UxGT("Prechauffage ABS")#define MSG_PREHEAT_2_N _UxGT("Prechauff. ABS ")#define MSG_PREHEAT_2_ALL _UxGT("Prech. ABS Tout")#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse")#define MSG_PREHEAT_2_BEDONLY _UxGT("Prech. ABS lit")#define MSG_PREHEAT_2_SETTINGS _UxGT("Regl. prech. ABS")#define MSG_COOLDOWN _UxGT("Refroidir")#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.")#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.")#define MSG_EXTRUDE _UxGT("Extrusion")#define MSG_RETRACT _UxGT("Retraction")#define MSG_MOVE_AXIS _UxGT("Deplacer un axe")#define MSG_BED_LEVELING _UxGT("Regl. Niv. lit")#define MSG_LEVEL_BED _UxGT("Regl. Niv. lit")#define MSG_LEVEL_CORNERS _UxGT("Niveau coins")#define MSG_NEXT_CORNER _UxGT("Coin suivant")#define MSG_EDITING_STOPPED _UxGT("Arret edit. maillage")#define MSG_USER_MENU _UxGT("Commandes perso")#define MSG_UBL_DOING_G29 _UxGT("G29 en cours")#define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord")#define MSG_UBL_TOOLS _UxGT("Outils UBL")#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifie")#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel")#define MSG_UBL_BC_INSERT _UxGT("Poser cale & mesurer")#define MSG_UBL_BC_INSERT2 _UxGT("Mesure")#define MSG_UBL_BC_REMOVE _UxGT("Oter et mesurer lit")#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant")#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL")#define MSG_UBL_DEACTIVATE_MESH _UxGT("Desactiver l'UBL")#define MSG_UBL_SET_BED_TEMP _UxGT("Temperature lit")#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temperature buse")#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP#define MSG_UBL_MESH_EDIT _UxGT("Editer maille")#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso")#define MSG_UBL_FINE_TUNE_MESH _UxGT("Reglage fin maille")#define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille")#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Creer maille perso")#define MSG_UBL_BUILD_MESH_MENU _UxGT("Creer maille")#define MSG_UBL_BUILD_PLA_MESH _UxGT("Creer maille PLA")#define MSG_UBL_BUILD_ABS_MESH _UxGT("Creer maille ABS")#define MSG_UBL_BUILD_COLD_MESH _UxGT("Creer maille froide")#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille")#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur")#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille")#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA")#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS")#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso")#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille")#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille")#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau en 3 points")#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau par grille")#define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau")#define MSG_UBL_SIDE_POINTS _UxGT("Points lateraux")#define MSG_UBL_MAP_TYPE _UxGT("Type de carte")#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille")#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hote")#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV")#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.")#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL")#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille")#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage")#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel")#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto")#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage")#define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler")#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus pres")#define MSG_UBL_FINE_TUNE_ALL _UxGT("Reglage fin (tous)")#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Reglage fin (proche)")#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille")#define MSG_UBL_STORAGE_SLOT _UxGT("Slot memoire")#define MSG_UBL_LOAD_MESH _UxGT("Charger maille")#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille")#define MSG_MESH_LOADED _UxGT("Maille %i charg.")#define MSG_MESH_SAVED _UxGT("Maille %i enreg.")#define MSG_NO_STORAGE _UxGT("Pas de memoire")#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL")#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL")#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Decal. Z arrete")#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas a pas")#define MSG_LED_CONTROL _UxGT("Controle LED")#define MSG_LEDS _UxGT("Lumiere")#define MSG_LED_PRESETS _UxGT("Preregl. LED")#define MSG_SET_LEDS_RED _UxGT("Rouge")#define MSG_SET_LEDS_ORANGE _UxGT("Orange")#define MSG_SET_LEDS_YELLOW _UxGT("Jaune")#define MSG_SET_LEDS_GREEN _UxGT("Vert")#define MSG_SET_LEDS_BLUE _UxGT("Bleu")#define MSG_SET_LEDS_INDIGO _UxGT("Indigo")#define MSG_SET_LEDS_VIOLET _UxGT("Violet")#define MSG_SET_LEDS_WHITE _UxGT("Blanc")#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut")#define MSG_CUSTOM_LEDS _UxGT("Lum. perso.")#define MSG_INTENSITY_R _UxGT("Intensite rouge")#define MSG_INTENSITY_G _UxGT("Intensite vert")#define MSG_INTENSITY_B _UxGT("Intensite bleu")#define MSG_INTENSITY_W _UxGT("Intensite blanc")#define MSG_LED_BRIGHTNESS _UxGT("Luminosite")#define MSG_MOVING _UxGT("Deplacement...")#define MSG_FREE_XY _UxGT("Debloquer XY")#define MSG_MOVE_X _UxGT("Depl. X")#define MSG_MOVE_Y _UxGT("Depl. Y")#define MSG_MOVE_Z _UxGT("Depl. Z")#define MSG_MOVE_E _UxGT("Extrudeur")#define MSG_MOVE_01MM _UxGT("Depl. 0.1mm")#define MSG_MOVE_1MM _UxGT("Depl. 1mm")#define MSG_MOVE_10MM _UxGT("Depl. 10mm")#define MSG_SPEED _UxGT("Vitesse")#define MSG_BED_Z _UxGT("Lit Z")#define MSG_NOZZLE _UxGT("Buse")#define MSG_BED _UxGT("Lit")#define MSG_FAN_SPEED _UxGT("Vitesse ventil.")#define MSG_EXTRA_FAN_SPEED _UxGT("Extra V ventil.")#define MSG_FLOW _UxGT("Flux")#define MSG_CONTROL _UxGT("Controler")#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Facteur")#define MSG_AUTOTEMP _UxGT("Temp. Auto.")#define MSG_ON _UxGT("Marche")#define MSG_OFF _UxGT("Arret")#define MSG_PID_P _UxGT("PID-P")#define MSG_PID_I _UxGT("PID-I")#define MSG_PID_D _UxGT("PID-D")#define MSG_PID_C _UxGT("PID-C")#define MSG_SELECT _UxGT("Selectionner")#define MSG_ACC _UxGT("Acceleration")#define MSG_JERK _UxGT("Jerk")#if IS_KINEMATIC#define MSG_VA_JERK _UxGT("Va jerk")#define MSG_VB_JERK _UxGT("Vb jerk")#define MSG_VC_JERK _UxGT("Vc jerk")#else#define MSG_VA_JERK _UxGT("Vx jerk")#define MSG_VB_JERK _UxGT("Vy jerk")#define MSG_VC_JERK _UxGT("Vz jerk")#endif#define MSG_VE_JERK _UxGT("Ve jerk")#define MSG_VELOCITY _UxGT("Velocite")#define MSG_VMAX _UxGT("Vmax ")#define MSG_VMIN _UxGT("Vmin ")#define MSG_VTRAV_MIN _UxGT("V depl. min")#define MSG_ACCELERATION _UxGT("Acceleration")#define MSG_AMAX _UxGT("Amax ")#define MSG_A_RETRACT _UxGT("A retrait")#define MSG_A_TRAVEL _UxGT("A Depl.")#define MSG_STEPS_PER_MM _UxGT("Pas/mm")#if IS_KINEMATIC#define MSG_ASTEPS _UxGT("A pas/mm")#define MSG_BSTEPS _UxGT("B pas/mm")#define MSG_CSTEPS _UxGT("C pas/mm")#else#define MSG_ASTEPS _UxGT("X pas/mm")#define MSG_BSTEPS _UxGT("Y pas/mm")#define MSG_CSTEPS _UxGT("Z pas/mm")#endif#define MSG_ESTEPS _UxGT("E pas/mm")#define MSG_E1STEPS _UxGT("E1 pas/mm")#define MSG_E2STEPS _UxGT("E2 pas/mm")#define MSG_E3STEPS _UxGT("E3 pas/mm")#define MSG_E4STEPS _UxGT("E4 pas/mm")#define MSG_E5STEPS _UxGT("E5 pas/mm")#define MSG_TEMPERATURE _UxGT("Temperature")#define MSG_MOTION _UxGT("Mouvement")#define MSG_FILAMENT _UxGT("Filament")#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")#define MSG_FILAMENT_DIAM _UxGT("Diam. fil.")#define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm")#define MSG_FILAMENT_LOAD _UxGT("Charger mm")#define MSG_ADVANCE_K _UxGT("Avance K")#define MSG_CONTRAST _UxGT("Contraste LCD")#define MSG_STORE_EEPROM _UxGT("Sauver config")#define MSG_LOAD_EEPROM _UxGT("Lire config")#define MSG_RESTORE_FAILSAFE _UxGT("Restaurer defauts")#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM")#define MSG_REFRESH _UxGT("Actualiser")#define MSG_WATCH _UxGT("Infos")#define MSG_PREPARE _UxGT("Preparer")#define MSG_TUNE _UxGT("Regler")#define MSG_PAUSE_PRINT _UxGT("Interrompre impr.")#define MSG_RESUME_PRINT _UxGT("Reprendre impr.")#define MSG_STOP_PRINT _UxGT("Arreter impr.")#define MSG_POWER_LOSS_RECOVERY _UxGT("Recup. coupure elec.")#define MSG_CARD_MENU _UxGT("Impr. depuis SD")#define MSG_NO_CARD _UxGT("Pas de carte")#define MSG_DWELL _UxGT("Veille...")#define MSG_USERWAIT _UxGT("Clic pour reprendre")#define MSG_PRINT_PAUSED _UxGT("Impr. en pause")#define MSG_PRINT_ABORTED _UxGT("Impr. annulee")#define MSG_NO_MOVE _UxGT("Moteurs bloques.")#define MSG_KILLED _UxGT("MORT.")#define MSG_STOPPED _UxGT("STOPPE.")#define MSG_CONTROL_RETRACT _UxGT("Retrait mm")#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm")#define MSG_CONTROL_RETRACTF _UxGT("Retrait V")#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saut Z mm")#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm")#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rapp. mm")#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V")#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V")#define MSG_AUTORETRACT _UxGT("Retrait. Auto.")#define MSG_FILAMENTCHANGE _UxGT("Changer filament")#define MSG_FILAMENTLOAD _UxGT("Charger fil.")#define MSG_FILAMENTUNLOAD _UxGT("Decharger fil.")#define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout")#define MSG_INIT_SDCARD _UxGT("Init. la carte SD")#define MSG_CNG_SDCARD _UxGT("Changer de carte")#define MSG_ZPROBE_OUT _UxGT("Sonde Z hors lit")#define MSG_SKEW_FACTOR _UxGT("Facteur derive")#define MSG_BLTOUCH _UxGT("BLTouch")#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")#define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch")#define MSG_BLTOUCH_DEPLOY _UxGT("Deployer BLTouch")#define MSG_BLTOUCH_STOW _UxGT("Ranger BLTouch")#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST#define MSG_FIRST _UxGT("Premier")#define MSG_ZPROBE_ZOFFSET _UxGT("Decalage Z")#define MSG_BABYSTEP_X _UxGT("Babystep X")#define MSG_BABYSTEP_Y _UxGT("Babystep Y")#define MSG_BABYSTEP_Z _UxGT("Babystep Z")#define MSG_ENDSTOP_ABORT _UxGT("Butee abandon")#define MSG_HEATING_FAILED_LCD _UxGT("Erreur de chauffe")#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANTE")#define MSG_THERMAL_RUNAWAY _UxGT("EMBALLEMENT THERM.")#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP. MAX")#define MSG_ERR_MINTEMP _UxGT("Err: TEMP. MIN")#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP. MAX LIT")#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP. MIN LIT")#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST#define MSG_HALTED _UxGT("IMPR. STOPPEE")#define MSG_PLEASE_RESET _UxGT("RaZ. SVP")#define MSG_SHORT_DAY _UxGT("j") // One character only#define MSG_SHORT_HOUR _UxGT("h") // One character only#define MSG_SHORT_MINUTE _UxGT("m") // One character only#define MSG_HEATING _UxGT("En chauffe...")#define MSG_BED_HEATING _UxGT("Lit en chauffe...")#define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta")#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X")#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y")#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z")#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre")#define MSG_DELTA_SETTINGS _UxGT("Reglages Delta")#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto")#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta")#define MSG_DELTA_DIAG_ROD _UxGT("Diagonale")#define MSG_DELTA_HEIGHT _UxGT("Hauteur")#define MSG_DELTA_RADIUS _UxGT("Rayon")#define MSG_INFO_MENU _UxGT("A propos impr.")#define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante")#define MSG_3POINT_LEVELING _UxGT("Niveau en 3 points")#define MSG_LINEAR_LEVELING _UxGT("Niveau lineaire")#define MSG_BILINEAR_LEVELING _UxGT("Niveau bilineaire")#define MSG_UBL_LEVELING _UxGT("Niveau lit unifie")#define MSG_MESH_LEVELING _UxGT("Niveau maillage")#define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante")#define MSG_INFO_BOARD_MENU _UxGT("Infos carte")#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermocouples")#define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs")#define MSG_INFO_BAUDRATE _UxGT("Baud")#define MSG_INFO_PROTOCOL _UxGT("Protocole")#define MSG_CASE_LIGHT _UxGT("Lumiere caisson")#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosite")#if LCD_WIDTH >= 20#define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminees")#define MSG_INFO_PRINT_TIME _UxGT("Tps impr. total")#define MSG_INFO_PRINT_LONGEST _UxGT("Impr. la + longue")#define MSG_INFO_PRINT_FILAMENT _UxGT("Total filament")#else#define MSG_INFO_PRINT_COUNT _UxGT("Impressions")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminees")#define MSG_INFO_PRINT_TIME _UxGT("Total")#define MSG_INFO_PRINT_LONGEST _UxGT("+ long")#define MSG_INFO_PRINT_FILAMENT _UxGT("Filament")#endif#define MSG_INFO_MIN_TEMP _UxGT("Temp Min")#define MSG_INFO_MAX_TEMP _UxGT("Temp Max")#define MSG_INFO_PSU _UxGT("Alimentation")#define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ")#define MSG_DAC_PERCENT _UxGT("Driver %")#define MSG_DAC_EEPROM_WRITE _UxGT("Sauv. DAC EEPROM")#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE")#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL")#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL")#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:")#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger plus")#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine")#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde")#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid")#if LCD_HEIGHT >= 4// Up to 3 lines allowed#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente demarrage")#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du changement")#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filament")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de")#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("decharger filament")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer filament")#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et clic bouton")#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...")#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...")#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse")#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe")#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente de")#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament")#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente")#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purger filament")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente impression")#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre")#else // LCD_HEIGHT < 4// Up to 2 lines allowed#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer et clic")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...")#endif // LCD_HEIGHT < 4#endif // LANGUAGE_FR_H