Blame | Last modification | View Log | RSS feed
/*** Marlin 3D Printer Firmware* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]** Based on Sprinter and grbl.* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm** This program is free software: you can redistribute it and/or modify* it under the terms of the GNU General Public License as published by* the Free Software Foundation, either version 3 of the License, or* (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program. If not, see <http://www.gnu.org/licenses/>.**//*** Simplified Chinese** LCD Menu Messages* See also http://marlinfw.org/docs/development/lcd_language.html**/#ifndef LANGUAGE_ZH_CN_H#define LANGUAGE_ZH_CN_H#define CHARSIZE 3#define WELCOME_MSG MACHINE_NAME _UxGT("已就绪.") //" ready."#define MSG_BACK _UxGT("返回") // ”Back“#define MSG_SD_INSERTED _UxGT("存储卡已插入") //"Card inserted"#define MSG_SD_REMOVED _UxGT("存储卡被拔出") //"Card removed"#define MSG_LCD_ENDSTOPS _UxGT("挡块") //"Endstops" // Max length 8 characters#define MSG_MAIN _UxGT("主菜单") //"Main"#define MSG_AUTOSTART _UxGT("自动开始") //"Autostart"#define MSG_DISABLE_STEPPERS _UxGT("关闭步进电机") //"Disable steppers"#define MSG_DEBUG_MENU _UxGT("调试菜单") // "Debug Menu"#define MSG_PROGRESS_BAR_TEST _UxGT("进度条测试") // "Progress Bar Test"#define MSG_AUTO_HOME _UxGT("回原点") //"Auto home"#define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X"#define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y"#define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z"#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校准Z") //"Calibrate Z"#define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ"#define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin"#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point"#define MSG_LEVEL_BED_DONE _UxGT("完成热床调平") //"Leveling Done!"#define MSG_Z_FADE_HEIGHT _UxGT("淡出高度") // "Fade Height"#define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets"#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied"#define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin"#define MSG_PREHEAT_1 _UxGT("预热PLA") //"Preheat PLA"#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed"#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf"#define MSG_PREHEAT_2 _UxGT("预热ABS") //"Preheat ABS"#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed"#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 设置") //MSG_PREHEAT_2 " conf"#define MSG_COOLDOWN _UxGT("降温") //"Cooldown"#define MSG_SWITCH_PS_ON _UxGT("电源打开") //"Switch power on"#define MSG_SWITCH_PS_OFF _UxGT("电源关闭") //"Switch power off"#define MSG_EXTRUDE _UxGT("挤出") //"Extrude"#define MSG_RETRACT _UxGT("回抽") //"Retract"#define MSG_MOVE_AXIS _UxGT("移动轴") //"Move axis"#define MSG_BED_LEVELING _UxGT("调平热床") //"Bed leveling"#define MSG_LEVEL_BED _UxGT("调平热床") //"Level bed"#define MSG_LEVEL_CORNERS _UxGT("调平边角") // "Level corners"#define MSG_NEXT_CORNER _UxGT("下个边角") // "Next corner"#define MSG_EDITING_STOPPED _UxGT("网格编辑已停止") // "Mesh Editing Stopped"#define MSG_USER_MENU _UxGT("定制命令") // "Custom Commands"#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29"#define MSG_UBL_UNHOMED _UxGT("先回XYZ原点") // "Home XYZ first"#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools"#define MSG_UBL_LEVEL_BED _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"#define MSG_UBL_MANUAL_MESH _UxGT("手工创设网格") // "Manually Build Mesh"#define MSG_UBL_BC_INSERT _UxGT("放置垫片并测量") // "Place shim & measure"#define MSG_UBL_BC_INSERT2 _UxGT("测量") // "Measure"#define MSG_UBL_BC_REMOVE _UxGT("移除并测量热床") // "Remove & measure bed"#define MSG_UBL_MOVING_TO_NEXT _UxGT("移动到下一个") // "Moving to next"#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL"#define MSG_UBL_DEACTIVATE_MESH _UxGT("关闭UBL") // "Deactivate UBL"#define MSG_UBL_SET_BED_TEMP _UxGT("设置热床温度") // "Bed Temp"#define MSG_UBL_SET_HOTEND_TEMP _UxGT("热端温度") // "Hotend Temp"#define MSG_UBL_MESH_EDIT _UxGT("网格编辑") // "Mesh Edit"#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("编辑客户网格") // "Edit Custom Mesh"#define MSG_UBL_FINE_TUNE_MESH _UxGT("细调网格") // "Fine Tuning Mesh"#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成编辑网格") // "Done Editing Mesh"#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("创设客户网格") // "Build Custom Mesh"#define MSG_UBL_BUILD_MESH_MENU _UxGT("创设网格") // "Build Mesh"#define MSG_UBL_BUILD_PLA_MESH _UxGT("创设PLA网格") // "Build PLA Mesh"#define MSG_UBL_BUILD_ABS_MESH _UxGT("创设ABS网格") // "Build ABS Mesh"#define MSG_UBL_BUILD_COLD_MESH _UxGT("创设冷网格") // "Build Cold Mesh"#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("调整网格高度") // "Adjust Mesh Height"#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合计") // "Height Amount"#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准网格") // "Validate Mesh"#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA网格") // "Validate PLA Mesh"#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS网格") // "Validate ABS Mesh"#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客户网格") // "Validate Custom Mesh"#define MSG_UBL_CONTINUE_MESH _UxGT("继续热床网格") // "Continue Bed Mesh"#define MSG_UBL_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三点调平") // "3-Point Leveling"#define MSG_UBL_GRID_MESH_LEVELING _UxGT("格子网格调平") // "Grid Mesh Leveling"#define MSG_UBL_MESH_LEVEL _UxGT("调平网格") // "Level Mesh"#define MSG_UBL_SIDE_POINTS _UxGT("边点") // "Side Points"#define MSG_UBL_MAP_TYPE _UxGT("图类型") // "Map Type"#define MSG_UBL_OUTPUT_MAP _UxGT("输出网格图") // "Output Mesh Map"#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("输出到主机") // "Output for Host"#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("输出到CSV") // "Output for CSV"#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("输出到备份") // "Off Printer Backup"#define MSG_UBL_INFO_UBL _UxGT("输出UBL信息") // "Output UBL Info"#define MSG_UBL_EDIT_MESH_MENU _UxGT("编辑网格") // "Edit Mesh"#define MSG_UBL_FILLIN_AMOUNT _UxGT("填充合计") // "Fill-in Amount"#define MSG_UBL_MANUAL_FILLIN _UxGT("手工填充") // "Manual Fill-in"#define MSG_UBL_SMART_FILLIN _UxGT("聪明填充") // "Smart Fill-in"#define MSG_UBL_FILLIN_MESH _UxGT("填充网格") // "Fill-in Mesh"#define MSG_UBL_INVALIDATE_ALL _UxGT("作废所有的") // "Invalidate All"#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("作废最近的") // "Invalidate Closest"#define MSG_UBL_FINE_TUNE_ALL _UxGT("细调所有的") // "Fine Tune All"#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("细调最近的") // "Fine Tune Closest"#define MSG_UBL_STORAGE_MESH_MENU _UxGT("网格存储") // "Mesh Storage"#define MSG_UBL_STORAGE_SLOT _UxGT("存储槽") // "Memory Slot"#define MSG_UBL_LOAD_MESH _UxGT("装载热床网格") // "Load Bed Mesh"#define MSG_UBL_SAVE_MESH _UxGT("保存热床网格") // "Save Bed Mesh"#define MSG_MESH_LOADED _UxGT("网格 %i 已装载") // "Mesh %i loaded"#define MSG_MESH_SAVED _UxGT("网格 %i 已保存") // "Mesh %i saved"#define MSG_NO_STORAGE _UxGT("没有存储") // "No storage"#define MSG_UBL_SAVE_ERROR _UxGT("错误: UBL保存") // "Err: UBL Save"#define MSG_UBL_RESTORE_ERROR _UxGT("错误: UBL还原") // "Err: UBL Restore"#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z偏移已停止") // "Z-Offset Stopped"#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("一步步UBL") // "Step-By-Step UBL"#define MSG_LED_CONTROL _UxGT("灯管控制") // "LED Control")#define MSG_LEDS _UxGT("灯") // "Lights")#define MSG_LED_PRESETS _UxGT("灯预置") // "Light Presets")#define MSG_SET_LEDS_RED _UxGT("红") // "Red")#define MSG_SET_LEDS_ORANGE _UxGT("橙") // "Orange")#define MSG_SET_LEDS_YELLOW _UxGT("黄") // "Yellow")#define MSG_SET_LEDS_GREEN _UxGT("绿") // "Green")#define MSG_SET_LEDS_BLUE _UxGT("蓝") // "Blue")#define MSG_SET_LEDS_INDIGO _UxGT("青") // "Indigo")#define MSG_SET_LEDS_VIOLET _UxGT("紫") // "Violet")#define MSG_SET_LEDS_WHITE _UxGT("白") // "White")#define MSG_SET_LEDS_DEFAULT _UxGT("缺省") // "Default")#define MSG_CUSTOM_LEDS _UxGT("定制灯") // "Custom Lights")#define MSG_INTENSITY_R _UxGT("红饱和度") // "Red Intensity")#define MSG_INTENSITY_G _UxGT("绿饱和度") // "Green Intensity")#define MSG_INTENSITY_B _UxGT("蓝饱和度") // "Blue Intensity")#define MSG_INTENSITY_W _UxGT("白饱和度") // "White Intensity")#define MSG_LED_BRIGHTNESS _UxGT("亮度") // "Brightness")#define MSG_MOVING _UxGT("移动 ...") // "Moving...")#define MSG_FREE_XY _UxGT("释放 XY") // "Free XY")#define MSG_MOVE_X _UxGT("移动X") //"Move X"#define MSG_MOVE_Y _UxGT("移动Y") //"Move Y"#define MSG_MOVE_Z _UxGT("移动Z") //"Move Z"#define MSG_MOVE_E _UxGT("挤出机") //"Extruder"#define MSG_MOVE_01MM _UxGT("移动 0.1 mm") //"Move 0.1mm"#define MSG_MOVE_1MM _UxGT("移动 1 mm") //"Move 1mm"#define MSG_MOVE_10MM _UxGT("移动 10 mm") //"Move 10mm"#define MSG_SPEED _UxGT("速率") //"Speed"#define MSG_BED_Z _UxGT("热床Z") //"Bed Z"#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 喷嘴") //"Nozzle" 噴嘴#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 热床") //"Bed"#define MSG_FAN_SPEED _UxGT("风扇速率") //"Fan speed"#define MSG_EXTRA_FAN_SPEED _UxGT("额外风扇速率") // "Extra fan speed"#define MSG_FLOW _UxGT("挤出速率") //"Flow"#define MSG_CONTROL _UxGT("控制") //"Control"#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min"#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max"#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 因数") //" " LCD_STR_THERMOMETER " Fact"#define MSG_AUTOTEMP _UxGT("自动控温") //"Autotemp"#define MSG_ON _UxGT("开 ") //"On "#define MSG_OFF _UxGT("关 ") //"Off"#define MSG_PID_P _UxGT("PID-P") //"PID-P"#define MSG_PID_I _UxGT("PID-I") //"PID-I"#define MSG_PID_D _UxGT("PID-D") //"PID-D"#define MSG_PID_C _UxGT("PID-C") //"PID-C"#define MSG_SELECT _UxGT("选择") //"Select"#define MSG_ACC _UxGT("加速度") //"Accel" acceleration#define MSG_JERK _UxGT("抖动速率") // "Jerk"#if IS_KINEMATIC#define MSG_VA_JERK _UxGT("A轴抖动速率") //"Va-jerk"#define MSG_VB_JERK _UxGT("B轴抖动速率") //"Vb-jerk"#define MSG_VC_JERK _UxGT("C轴抖动速率") //"Vc-jerk"#else#define MSG_VA_JERK _UxGT("X轴抖动速率") //"Vx-jerk"#define MSG_VB_JERK _UxGT("Y轴抖动速率") //"Vy-jerk"#define MSG_VC_JERK _UxGT("Z轴抖动速率") //"Vz-jerk"#endif#define MSG_VE_JERK _UxGT("挤出机抖动速率") //"Ve-jerk"#define MSG_VELOCITY _UxGT("速度") // "Velocity"#define MSG_VMAX _UxGT("最大进料速率") //"Vmax " max_feedrate_mm_s#define MSG_VMIN _UxGT("最小进料速率") //"Vmin" min_feedrate_mm_s#define MSG_VTRAV_MIN _UxGT("最小移动速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move#define MSG_ACCELERATION _UxGT("加速度") // "Acceleration"#define MSG_AMAX _UxGT("最大打印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves#define MSG_A_RETRACT _UxGT("收进加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts#define MSG_A_TRAVEL _UxGT("非打印移动加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves#define MSG_STEPS_PER_MM _UxGT("轴步数/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92#if IS_KINEMATIC#define MSG_ASTEPS _UxGT("A轴步数/mm") //"Asteps/mm"#define MSG_BSTEPS _UxGT("B轴步数/mm") //"Bsteps/mm"#define MSG_CSTEPS _UxGT("C轴步数/mm") //"Csteps/mm"#else#define MSG_ASTEPS _UxGT("X轴步数/mm") //"Xsteps/mm"#define MSG_BSTEPS _UxGT("Y轴步数/mm") //"Ysteps/mm"#define MSG_CSTEPS _UxGT("Z轴步数/mm") //"Zsteps/mm"#endif#define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm"#define MSG_E1STEPS _UxGT("挤出机1步数/mm") //"E1steps/mm"#define MSG_E2STEPS _UxGT("挤出机2步数/mm") //"E2steps/mm"#define MSG_E3STEPS _UxGT("挤出机3步数/mm") //"E3steps/mm"#define MSG_E4STEPS _UxGT("挤出机4步数/mm") //"E4steps/mm"#define MSG_E5STEPS _UxGT("挤出机5步数/mm") //"E5steps/mm"#define MSG_TEMPERATURE _UxGT("温度") //"Temperature"#define MSG_MOTION _UxGT("运动") //"Motion"#define MSG_FILAMENT _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu#define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled#define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia."#define MSG_FILAMENT_UNLOAD _UxGT("卸载 mm") // "Unload mm"#define MSG_FILAMENT_LOAD _UxGT("装载 mm") // "Load mm"#define MSG_ADVANCE_K _UxGT("Advance K") // "Advance K"#define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast"#define MSG_STORE_EEPROM _UxGT("保存设置") //"Store memory"#define MSG_LOAD_EEPROM _UxGT("装载设置") //"Load memory"#define MSG_RESTORE_FAILSAFE _UxGT("恢复安全值") //"Restore failsafe"#define MSG_INIT_EEPROM _UxGT("初始化设置") // "Initialize EEPROM"#define MSG_REFRESH _UxGT("刷新") //"Refresh"#define MSG_WATCH _UxGT("信息屏") //"Info screen"#define MSG_PREPARE _UxGT("准备") //"Prepare"#define MSG_TUNE _UxGT("调整") //"Tune"#define MSG_PAUSE_PRINT _UxGT("暂停打印") //"Pause print"#define MSG_RESUME_PRINT _UxGT("恢复打印") //"Resume print"#define MSG_STOP_PRINT _UxGT("停止打印") //"Stop print"#define MSG_CARD_MENU _UxGT("从存储卡上打印") //"Print from SD"#define MSG_NO_CARD _UxGT("无存储卡") //"No SD card"#define MSG_DWELL _UxGT("休眠中 ...") //"Sleep..."#define MSG_USERWAIT _UxGT("点击继续 ...") //"Click to resume..."#define MSG_PRINT_PAUSED _UxGT("暫停打印") // "Print paused"#define MSG_PRINT_ABORTED _UxGT("已取消打印") //"Print aborted"#define MSG_NO_MOVE _UxGT("无移动") //"No move."#define MSG_KILLED _UxGT("已杀掉") //"KILLED. "#define MSG_STOPPED _UxGT("已停止") //"STOPPED. "#define MSG_CONTROL_RETRACT _UxGT("回抽长度mm") //"Retract mm" retract_length, retract length (positive mm)#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering)#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change)#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V"#define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled,#define MSG_FILAMENTCHANGE _UxGT("更换丝料") //"Change filament"#define MSG_FILAMENTLOAD _UxGT("装载丝料") // "Load filament"#define MSG_FILAMENTUNLOAD _UxGT("卸载丝料") // "Unload filament"#define MSG_FILAMENTUNLOAD_ALL _UxGT("卸载全部") // "Unload All"#define MSG_INIT_SDCARD _UxGT("初始化存储卡") //"Init. SD card"#define MSG_CNG_SDCARD _UxGT("更换存储卡") //"Change SD card"#define MSG_ZPROBE_OUT _UxGT("Z探针在热床之外") //"Z probe out. bed" Z probe is not within the physical limits#define MSG_SKEW_FACTOR _UxGT("偏斜因数") // "Skew Factor"#define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch"#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch 自检") // "BLTouch Self-Test"#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch"#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch"#define MSG_BLTOUCH_STOW _UxGT("装载BLTouch") // "Stow BLTouch"#define MSG_HOME _UxGT("归位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST#define MSG_FIRST _UxGT("先") //"first"#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"#define MSG_BABYSTEP_X _UxGT("微量调整X轴") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts#define MSG_BABYSTEP_Y _UxGT("微量调整Y轴") //"Babystep Y"#define MSG_BABYSTEP_Z _UxGT("微量调整Z轴") //"Babystep Z"#define MSG_ENDSTOP_ABORT _UxGT("挡块终止") //"Endstop abort"#define MSG_HEATING_FAILED_LCD _UxGT("加热失败") //"Heating failed"#define MSG_ERR_REDUNDANT_TEMP _UxGT("错误：REDUNDANT TEMP") //"Err: REDUNDANT TEMP"#define MSG_THERMAL_RUNAWAY _UxGT("温控失控") //"THERMAL RUNAWAY"#define MSG_ERR_MAXTEMP _UxGT("错误：最高温度") //"Err: MAXTEMP"#define MSG_ERR_MINTEMP _UxGT("错误：最低温度") //"Err: MINTEMP"#define MSG_ERR_MAXTEMP_BED _UxGT("错误：最高热床温度") //"Err: MAXTEMP BED"#define MSG_ERR_MINTEMP_BED _UxGT("错误：最低热床温度") //"Err: MINTEMP BED"#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST#define MSG_HALTED _UxGT("打印停机") //"PRINTER HALTED"#define MSG_PLEASE_RESET _UxGT("请重置") //"Please reset"#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only#define MSG_SHORT_HOUR _UxGT("时") //"h" // One character only#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only#define MSG_HEATING _UxGT("加热中 ...") //"Heating..."#define MSG_BED_HEATING _UxGT("加热热床中...") //"Bed Heating..."#define MSG_DELTA_CALIBRATE _UxGT("⊿校准") //"Delta Calibration"#define MSG_DELTA_CALIBRATE_X _UxGT("⊿校准X") //"Calibrate X"#define MSG_DELTA_CALIBRATE_Y _UxGT("⊿校准Y") //"Calibrate Y"#define MSG_DELTA_CALIBRATE_Z _UxGT("⊿校准Z") //"Calibrate Z"#define MSG_DELTA_CALIBRATE_CENTER _UxGT("⊿校准中心") //"Calibrate Center"#define MSG_DELTA_SETTINGS _UxGT("⊿设置") // "Delta Settings"#define MSG_DELTA_AUTO_CALIBRATE _UxGT("⊿自动校准") // "Auto Calibration"#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("设置⊿高度") // "Set Delta Height"#define MSG_DELTA_DIAG_ROD _UxGT("⊿斜柱") // "Diag Rod"#define MSG_DELTA_HEIGHT _UxGT("⊿高度") // "Height"#define MSG_DELTA_RADIUS _UxGT("⊿半径") // "Radius"#define MSG_INFO_MENU _UxGT("关于打印机") //"About Printer"#define MSG_INFO_PRINTER_MENU _UxGT("打印机信息") //"Printer Info"#define MSG_3POINT_LEVELING _UxGT("三点调平") // "3-Point Leveling"#define MSG_LINEAR_LEVELING _UxGT("线性调平") // "Linear Leveling"#define MSG_BILINEAR_LEVELING _UxGT("双线性调平") // "Bilinear Leveling"#define MSG_UBL_LEVELING _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"#define MSG_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"#define MSG_INFO_STATS_MENU _UxGT("打印机统计") //"Printer Stats"#define MSG_INFO_BOARD_MENU _UxGT("主板信息") //"Board Info"#define MSG_INFO_THERMISTOR_MENU _UxGT("温度计") //"Thermistors"#define MSG_INFO_EXTRUDERS _UxGT("挤出机") //"Extruders"#define MSG_INFO_BAUDRATE _UxGT("波特率") //"Baud"#define MSG_INFO_PROTOCOL _UxGT("协议") //"Protocol"#define MSG_CASE_LIGHT _UxGT("外壳灯") // "Case light"#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS"#if LCD_WIDTH > 19#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count"#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed"#define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time"#define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time"#define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total"#else#define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints"#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"#define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total"#define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest"#define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded"#endif#define MSG_INFO_MIN_TEMP _UxGT("最低温度") //"Min Temp"#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp"#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply"#define MSG_DRIVE_STRENGTH _UxGT("驱动力度") // "Drive Strength"#define MSG_DAC_PERCENT _UxGT("驱动 %") // "Driver %"#define MSG_DAC_EEPROM_WRITE _UxGT("保存驱动设置") // "DAC EEPROM Write"#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("打印已暂停") // "PRINT PAUSED"#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("装载丝料") // "LOAD FILAMENT"#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("卸载丝料") // "UNLOAD FILAMENT"#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("恢复选项:") // "RESUME OPTIONS:"#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("清除更多") // "Purge more"#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print"#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" 喷嘴: ") // " Nozzle: "#define MSG_ERR_HOMING_FAILED _UxGT("归原位失败") // "Homing failed"#define MSG_ERR_PROBING_FAILED _UxGT("探针探测失败") // "Probing failed"#define MSG_M600_TOO_COLD _UxGT("M600: 太凉") // "M600: Too cold"#if LCD_HEIGHT >= 4#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start"#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament"#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change"#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload"#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament"#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button"#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..."#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按钮来") // "Press button to"#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加热喷嘴.") // "heat nozzle."#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热喷嘴") // "Heating nozzle"#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("请等待 ...") // "Please wait..."#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("丝料清除") // "filament purge"#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"#else // LCD_HEIGHT < 4#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..."#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热中 ...") // "Heating..."#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."#endif // LCD_HEIGHT < 4#endif // LANGUAGE_ZH_CN_H