Blame | Last modification | View Log | RSS feed
/*** Marlin 3D Printer Firmware* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]** Based on Sprinter and grbl.* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm** This program is free software: you can redistribute it and/or modify* it under the terms of the GNU General Public License as published by* the Free Software Foundation, either version 3 of the License, or* (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program. If not, see <http://www.gnu.org/licenses/>.**//*** Danish** LCD Menu Messages* See also http://marlinfw.org/docs/development/lcd_language.html**/#ifndef LANGUAGE_DA_H#define LANGUAGE_DA_H#define MAPPER_C2C3#define DISPLAY_CHARSET_ISO10646_1#define CHARSIZE 2#define WELCOME_MSG MACHINE_NAME _UxGT(" er klar")#define MSG_SD_INSERTED _UxGT("Kort isat")#define MSG_SD_REMOVED _UxGT("Kort fjernet")#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters#define MSG_MAIN _UxGT("Menu")#define MSG_AUTOSTART _UxGT("Autostart")#define MSG_DISABLE_STEPPERS _UxGT("Slå alle steppere fra")#define MSG_AUTO_HOME _UxGT("Auto Home") // G28#define MSG_AUTO_HOME_X _UxGT("Home X")#define MSG_AUTO_HOME_Y _UxGT("Home Y")#define MSG_AUTO_HOME_Z _UxGT("Home Z")#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrer Z")#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")#define MSG_LEVEL_BED_WAITING _UxGT("Klik når du er klar")#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Næste punkt")#define MSG_LEVEL_BED_DONE _UxGT("Bed level er færdig!")#define MSG_SET_HOME_OFFSETS _UxGT("Sæt forsk. af home")#define MSG_HOME_OFFSETS_APPLIED _UxGT("Forsk. er nu aktiv")#define MSG_SET_ORIGIN _UxGT("Sæt origin")#define MSG_PREHEAT_1 _UxGT("Forvarm PLA")#define MSG_PREHEAT_1_N _UxGT("Forvarm PLA ")#define MSG_PREHEAT_1_ALL _UxGT("Forvarm PLA Alle")#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm PLA Bed")#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm PLA conf")#define MSG_PREHEAT_2 _UxGT("Forvarm ABS")#define MSG_PREHEAT_2_N _UxGT("Forvarm ABS ")#define MSG_PREHEAT_2_ALL _UxGT("Forvarm ABS Alle")#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm ABS Bed")#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm ABS conf")#define MSG_COOLDOWN _UxGT("Afkøl")#define MSG_SWITCH_PS_ON _UxGT("Slå strøm til")#define MSG_SWITCH_PS_OFF _UxGT("Slå strøm fra")#define MSG_EXTRUDE _UxGT("Extruder")#define MSG_RETRACT _UxGT("Retract")#define MSG_MOVE_AXIS _UxGT("Flyt akser")#define MSG_BED_LEVELING _UxGT("Juster bed")#define MSG_LEVEL_BED _UxGT("Juster bed")#define MSG_MOVE_X _UxGT("Flyt X")#define MSG_MOVE_Y _UxGT("Flyt Y")#define MSG_MOVE_Z _UxGT("Flyt Z")#define MSG_MOVE_E _UxGT("Extruder")#define MSG_MOVE_01MM _UxGT("Flyt 0.1mm")#define MSG_MOVE_1MM _UxGT("Flyt 1mm")#define MSG_MOVE_10MM _UxGT("Flyt 10mm")#define MSG_SPEED _UxGT("Hastighed")#define MSG_BED_Z _UxGT("Plade Z")#define MSG_NOZZLE _UxGT("Dyse")#define MSG_BED _UxGT("Plade")#define MSG_FAN_SPEED _UxGT("Blæser hastighed")#define MSG_FLOW _UxGT("Flow")#define MSG_CONTROL _UxGT("Kontrol")#define MSG_MIN _UxGT(" \002 Min")#define MSG_MAX _UxGT(" \002 Max")#define MSG_FACTOR _UxGT(" \002 Fact")#define MSG_AUTOTEMP _UxGT("Autotemp")#define MSG_ON _UxGT("Til ")#define MSG_OFF _UxGT("Fra")#define MSG_PID_P _UxGT("PID-P")#define MSG_PID_I _UxGT("PID-I")#define MSG_PID_D _UxGT("PID-D")#define MSG_PID_C _UxGT("PID-C")#define MSG_SELECT _UxGT("Vælg")#define MSG_ACC _UxGT("Accel")#define MSG_JERK _UxGT("Jerk")#if IS_KINEMATIC#define MSG_VA_JERK _UxGT("Va-jerk")#define MSG_VB_JERK _UxGT("Vb-jerk")#define MSG_VC_JERK _UxGT("Vc-jerk")#else#define MSG_VA_JERK _UxGT("Vx-jerk")#define MSG_VB_JERK _UxGT("Vy-jerk")#define MSG_VC_JERK _UxGT("Vz-jerk")#endif#define MSG_VE_JERK _UxGT("Ve-jerk")#define MSG_VMAX _UxGT("Vmax ")#define MSG_VMIN _UxGT("Vmin")#define MSG_VTRAV_MIN _UxGT("VTrav min")#define MSG_AMAX _UxGT("Amax ")#define MSG_A_RETRACT _UxGT("A-retract")#define MSG_A_TRAVEL _UxGT("A-rejse")#define MSG_STEPS_PER_MM _UxGT("Steps/mm")#if IS_KINEMATIC#define MSG_ASTEPS _UxGT("Asteps/mm")#define MSG_BSTEPS _UxGT("Bsteps/mm")#define MSG_CSTEPS _UxGT("Csteps/mm")#else#define MSG_ASTEPS _UxGT("Xsteps/mm")#define MSG_BSTEPS _UxGT("Ysteps/mm")#define MSG_CSTEPS _UxGT("Zsteps/mm")#endif#define MSG_ESTEPS _UxGT("Esteps/mm")#define MSG_E1STEPS _UxGT("E1steps/mm")#define MSG_E2STEPS _UxGT("E2steps/mm")#define MSG_E3STEPS _UxGT("E3steps/mm")#define MSG_E4STEPS _UxGT("E4steps/mm")#define MSG_E5STEPS _UxGT("E5steps/mm")#define MSG_TEMPERATURE _UxGT("Temperatur")#define MSG_MOTION _UxGT("Bevægelse")#define MSG_FILAMENT _UxGT("Filament")#define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3")#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")#define MSG_CONTRAST _UxGT("LCD kontrast")#define MSG_STORE_EEPROM _UxGT("Gem i EEPROM")#define MSG_LOAD_EEPROM _UxGT("Hent fra EEPROM")#define MSG_RESTORE_FAILSAFE _UxGT("Gendan failsafe")#define MSG_REFRESH _UxGT("Genopfrisk")#define MSG_WATCH _UxGT("Info skærm")#define MSG_PREPARE _UxGT("Forbered")#define MSG_TUNE _UxGT("Tune")#define MSG_PAUSE_PRINT _UxGT("Pause printet")#define MSG_RESUME_PRINT _UxGT("Forsæt printet")#define MSG_STOP_PRINT _UxGT("Stop printet")#define MSG_CARD_MENU _UxGT("Print fra SD")#define MSG_NO_CARD _UxGT("Intet SD kort")#define MSG_DWELL _UxGT("Dvale...")#define MSG_USERWAIT _UxGT("Venter på bruger...")#define MSG_PRINT_ABORTED _UxGT("Print annulleret")#define MSG_NO_MOVE _UxGT("Ingen bevægelse.")#define MSG_KILLED _UxGT("DRÆBT. ")#define MSG_STOPPED _UxGT("STOPPET. ")#define MSG_CONTROL_RETRACT _UxGT("Tilbagetræk mm")#define MSG_CONTROL_RETRACT_SWAP _UxGT("Skift Re.mm")#define MSG_CONTROL_RETRACTF _UxGT("Tilbagetræk V")#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Skift UnRet mm")#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")#define MSG_AUTORETRACT _UxGT("AutoRetr.")#define MSG_FILAMENTCHANGE _UxGT("Skift filament")#define MSG_INIT_SDCARD _UxGT("Init. SD card")#define MSG_CNG_SDCARD _UxGT("Skift SD kort")#define MSG_ZPROBE_OUT _UxGT("Probe udenfor plade")#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selv-Test")#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST#define MSG_FIRST _UxGT("først")#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")#define MSG_BABYSTEP_X _UxGT("Babystep X")#define MSG_BABYSTEP_Y _UxGT("Babystep Y")#define MSG_BABYSTEP_Z _UxGT("Babystep Z")#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")#define MSG_HEATING_FAILED_LCD _UxGT("Opvarmning fejlet")#define MSG_ERR_REDUNDANT_TEMP _UxGT("Fejl: reserve temp")#define MSG_THERMAL_RUNAWAY _UxGT("Temp løber løbsk")#define MSG_ERR_MAXTEMP _UxGT("Fejl: Maks temp")#define MSG_ERR_MINTEMP _UxGT("Fejl: Min temp")#define MSG_ERR_MAXTEMP_BED _UxGT("Fejl: Maks Plade temp")#define MSG_ERR_MINTEMP_BED _UxGT("Fejl: Min Plade temp")#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST#define MSG_HALTED _UxGT("PRINTER STOPPET")#define MSG_PLEASE_RESET _UxGT("Reset Venligst")#define MSG_SHORT_DAY _UxGT("d") // Kun et bogstav#define MSG_SHORT_HOUR _UxGT("h") // Kun et bogstav#define MSG_SHORT_MINUTE _UxGT("m") // Kun et bogstav#define MSG_HEATING _UxGT("Opvarmer...")#define MSG_BED_HEATING _UxGT("Opvarmer plade...")#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrering")#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrer X")#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrer Y")#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrer Z")#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrerings Center")#define MSG_INFO_MENU _UxGT("Om Printer")#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")#define MSG_INFO_BOARD_MENU _UxGT("Kort Info")#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")#define MSG_INFO_EXTRUDERS _UxGT("Extruders")#define MSG_INFO_BAUDRATE _UxGT("Baud")#define MSG_INFO_PROTOCOL _UxGT("Protocol")#if LCD_WIDTH >= 20#define MSG_INFO_PRINT_COUNT _UxGT("Ant. Prints")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige")#define MSG_INFO_PRINT_TIME _UxGT("Total print tid")#define MSG_INFO_PRINT_LONGEST _UxGT("Længste print")#define MSG_INFO_PRINT_FILAMENT _UxGT("Total Extruderet")#else#define MSG_INFO_PRINT_COUNT _UxGT("Prints")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige")#define MSG_INFO_PRINT_TIME _UxGT("Total")#define MSG_INFO_PRINT_LONGEST _UxGT("Længste")#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruderet")#endif#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")#define MSG_INFO_PSU _UxGT("Strømfors.")#define MSG_DRIVE_STRENGTH _UxGT("Driv Styrke")#define MSG_DAC_PERCENT _UxGT("Driv %")#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Skriv")#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print")#if LCD_HEIGHT >= 4#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent på start")#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("af filament")#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("skift")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vent på")#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament udskyd.")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt filament")#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("og tryk på knap")#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("for at fortsætte...")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Vent på")#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament indtag")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Vent på at print")#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("fortsætter")#else // LCD_HEIGHT < 4#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent venligst...")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Udskyder...")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt og klik")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...")#endif // LCD_HEIGHT < 4#endif // LANGUAGE_DA_H