Blame | Last modification | View Log | RSS feed
/*** Marlin 3D Printer Firmware* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]** Based on Sprinter and grbl.* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm** This program is free software: you can redistribute it and/or modify* it under the terms of the GNU General Public License as published by* the Free Software Foundation, either version 3 of the License, or* (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program. If not, see <http://www.gnu.org/licenses/>.**//*** German** LCD Menu Messages* See also http://marlinfw.org/docs/development/lcd_language.html**/#ifndef LANGUAGE_DE_H#define LANGUAGE_DE_H#define MAPPER_C2C3#define DISPLAY_CHARSET_ISO10646_1#define CHARSIZE 2#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³")#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")#define MSG_BACK _UxGT("Zurück")#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft-Endstopp")#define MSG_MAIN _UxGT("Hauptmenü")#define MSG_AUTOSTART _UxGT("Autostart")#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84#define MSG_DEBUG_MENU _UxGT("Debug-Menü")#define MSG_PROGRESS_BAR_TEST _UxGT("Statusbalken-Test")#define MSG_AUTO_HOME _UxGT("Home XYZ") // G28#define MSG_AUTO_HOME_X _UxGT("Home X")#define MSG_AUTO_HOME_Y _UxGT("Home Y")#define MSG_AUTO_HOME_Z _UxGT("Home Z")#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriere Z")#define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ")#define MSG_LEVEL_BED_WAITING _UxGT("Klick zum Starten")#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")#define MSG_LEVEL_BED_DONE _UxGT("Nivellieren fertig!")#define MSG_Z_FADE_HEIGHT _UxGT("Ausblendhöhe")#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alles")#define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.")#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alles")#define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.")#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")#define MSG_COOLDOWN _UxGT("Abkühlen")#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")#define MSG_EXTRUDE _UxGT("Extrudieren")#define MSG_RETRACT _UxGT("Rückzug")#define MSG_MOVE_AXIS _UxGT("Achse Bewegen")#define MSG_BED_LEVELING _UxGT("Bett-Nivellierung")#define MSG_LEVEL_BED _UxGT("Bett nivellieren")#define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren")#define MSG_NEXT_CORNER _UxGT("Nächste Ecke")#define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.")#define MSG_USER_MENU _UxGT("Benutzer-Menü")#define MSG_UBL_DOING_G29 _UxGT("G29 ausführen")#define MSG_UBL_UNHOMED _UxGT("Home XYZ zuerst")#define MSG_UBL_TOOLS _UxGT("UBL-Werkzeuge")#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen")#define MSG_UBL_BC_INSERT2 _UxGT("Messen")#define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen")#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...")#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren")#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren")#define MSG_UBL_SET_BED_TEMP _UxGT("Betttemperatur")#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend-Temp.")#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP#define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten")#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.")#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...")#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA")#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS")#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.")#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe")#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA")#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS")#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")#define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung")#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.")#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz-Nivell.")#define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren")#define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte")#define MSG_UBL_MAP_TYPE _UxGT("Kartentyp")#define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben")#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host")#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV")#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung")#define MSG_UBL_INFO_UBL _UxGT("UBL-Info ausgeben")#define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten")#define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Füllung")#define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Füllung")#define MSG_UBL_SMART_FILLIN _UxGT("Cleveres Füllen")#define MSG_UBL_FILLIN_MESH _UxGT("Netz Füllen")#define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren")#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.")#define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinst. Alles")#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.")#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz-Speicherplatz")#define MSG_UBL_STORAGE_SLOT _UxGT("Speicherort")#define MSG_UBL_LOAD_MESH _UxGT("Bettnetz laden")#define MSG_UBL_SAVE_MESH _UxGT("Bettnetz speichern")#define MSG_MESH_LOADED _UxGT("Netz %i geladen")#define MSG_MESH_SAVED _UxGT("Netz %i gespeichert")#define MSG_NO_STORAGE _UxGT("Kein Speicher")#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern")#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.")#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL")#define MSG_LED_CONTROL _UxGT("LED-Steuerung")#define MSG_LEDS _UxGT("Licht")#define MSG_LED_PRESETS _UxGT("Licht-Einstellungen")#define MSG_SET_LEDS_RED _UxGT("Rot")#define MSG_SET_LEDS_ORANGE _UxGT("Orange")#define MSG_SET_LEDS_YELLOW _UxGT("Gelb")#define MSG_SET_LEDS_GREEN _UxGT("Grün")#define MSG_SET_LEDS_BLUE _UxGT("Blau")#define MSG_SET_LEDS_INDIGO _UxGT("Indigo")#define MSG_SET_LEDS_VIOLET _UxGT("Violett")#define MSG_SET_LEDS_WHITE _UxGT("Weiß")#define MSG_SET_LEDS_DEFAULT _UxGT("Standard")#define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.")#define MSG_INTENSITY_R _UxGT("Intensität Rot")#define MSG_INTENSITY_G _UxGT("Intensität Grün")#define MSG_INTENSITY_B _UxGT("Intensität Blau")#define MSG_INTENSITY_W _UxGT("Intensität Weiß")#define MSG_LED_BRIGHTNESS _UxGT("Helligkeit")#define MSG_MOVING _UxGT("In Bewegung...")#define MSG_FREE_XY _UxGT("Abstand XY")#define MSG_MOVE_X _UxGT("Bewege X")#define MSG_MOVE_Y _UxGT("Bewege Y")#define MSG_MOVE_Z _UxGT("Bewege Z")#define MSG_MOVE_E _UxGT("Bewege Extruder")#define MSG_MOVE_01MM _UxGT(" 0,1 mm")#define MSG_MOVE_1MM _UxGT(" 1,0 mm")#define MSG_MOVE_10MM _UxGT("10,0 mm")#define MSG_SPEED _UxGT("Geschw.")#define MSG_BED_Z _UxGT("Bett Z")#define MSG_NOZZLE _UxGT("Düse")#define MSG_BED _UxGT("Bett")#define MSG_FAN_SPEED _UxGT("Lüfter")#define MSG_EXTRA_FAN_SPEED _UxGT("Geschw. Extralüfter")#define MSG_FLOW _UxGT("Flussrate")#define MSG_CONTROL _UxGT("Einstellungen")#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")#define MSG_AUTOTEMP _UxGT("Auto Temperatur")#define MSG_ON _UxGT("Ein")#define MSG_OFF _UxGT("Aus")#define MSG_PID_P _UxGT("PID P")#define MSG_PID_I _UxGT("PID I")#define MSG_PID_D _UxGT("PID D")#define MSG_PID_C _UxGT("PID C")#define MSG_SELECT _UxGT("Auswählen")#define MSG_ACC _UxGT("Beschleunigung")#define MSG_JERK _UxGT("Jerk")#if IS_KINEMATIC#define MSG_VA_JERK _UxGT("V A Jerk")#define MSG_VB_JERK _UxGT("V B Jerk")#define MSG_VC_JERK _UxGT("V C Jerk")#else#define MSG_VA_JERK _UxGT("V X Jerk")#define MSG_VB_JERK _UxGT("V Y Jerk")#define MSG_VC_JERK _UxGT("V Z Jerk")#endif#define MSG_VE_JERK _UxGT("V E Jerk")#define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev")#define MSG_VELOCITY _UxGT("Geschwindigkeit")#define MSG_VMAX _UxGT("V max ") // space intentional#define MSG_VMIN _UxGT("V min")#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")#define MSG_ACCELERATION _UxGT("Beschleunigung")#define MSG_AMAX _UxGT("A max ") // space intentional#define MSG_A_RETRACT _UxGT("A Rückzug")#define MSG_A_TRAVEL _UxGT("A Leerfahrt")#define MSG_STEPS_PER_MM _UxGT("Steps/mm")#if IS_KINEMATIC#define MSG_ASTEPS _UxGT("A Steps/mm")#define MSG_BSTEPS _UxGT("B Steps/mm")#define MSG_CSTEPS _UxGT("C Steps/mm")#else#define MSG_ASTEPS _UxGT("X Steps/mm")#define MSG_BSTEPS _UxGT("Y Steps/mm")#define MSG_CSTEPS _UxGT("Z Steps/mm")#endif#define MSG_ESTEPS _UxGT("E Steps/mm")#define MSG_E1STEPS _UxGT("E1 Steps/mm")#define MSG_E2STEPS _UxGT("E2 Steps/mm")#define MSG_E3STEPS _UxGT("E3 Steps/mm")#define MSG_E4STEPS _UxGT("E4 Steps/mm")#define MSG_E5STEPS _UxGT("E5 Steps/mm")#define MSG_TEMPERATURE _UxGT("Temperatur")#define MSG_MOTION _UxGT("Bewegung")#define MSG_FILAMENT _UxGT("Filament")#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")#define MSG_FILAMENT_DIAM _UxGT("Durchm. Filament")#define MSG_FILAMENT_UNLOAD _UxGT("Entladen mm")#define MSG_FILAMENT_LOAD _UxGT("Laden mm")#define MSG_ADVANCE_K _UxGT("Vorschubfaktor")#define MSG_CONTRAST _UxGT("LCD-Kontrast")#define MSG_STORE_EEPROM _UxGT("Konfig. speichern")#define MSG_LOAD_EEPROM _UxGT("Konfig. laden")#define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden")#define MSG_INIT_EEPROM _UxGT("Werkseinstellungen")#define MSG_REFRESH _UxGT("Aktualisieren")#define MSG_WATCH _UxGT("Info")#define MSG_PREPARE _UxGT("Vorbereitung")#define MSG_TUNE _UxGT("Justierung")#define MSG_PAUSE_PRINT _UxGT("SD-Druck pausieren")#define MSG_RESUME_PRINT _UxGT("SD-Druck fortsetzen")#define MSG_STOP_PRINT _UxGT("SD-Druck abbrechen")#define MSG_POWER_LOSS_RECOVERY _UxGT("Wiederh. n. Stroma.")#define MSG_CARD_MENU _UxGT("Druck v. SD-Karte")#define MSG_NO_CARD _UxGT("Keine SD-Karte")#define MSG_DWELL _UxGT("Warten...")#define MSG_USERWAIT _UxGT("Klick zum Fortsetzen")#define MSG_PRINT_PAUSED _UxGT("Druck pausiert...")#define MSG_PRINTING _UxGT("Druckt...")#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")#define MSG_NO_MOVE _UxGT("Motoren angeschaltet")#define MSG_KILLED _UxGT("ABGEBROCHEN")#define MSG_STOPPED _UxGT("ANGEHALTEN")#define MSG_CONTROL_RETRACT _UxGT("Rückzug mm")#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Rückzug mm")#define MSG_CONTROL_RETRACTF _UxGT("Rückzug V")#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Sprung mm")#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")#define MSG_AUTORETRACT _UxGT("Autom. Rückzug")#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")#define MSG_FILAMENTLOAD _UxGT("Filament laden")#define MSG_FILAMENTUNLOAD _UxGT("Filament entladen")#define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen")#define MSG_INIT_SDCARD _UxGT("SD-Karte initialisi.") // Manually initialize the SD-card via user interface#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"#define MSG_ZPROBE_OUT _UxGT("Z-Sonde außerhalb")#define MSG_SKEW_FACTOR _UxGT("Korrekturfaktor")#define MSG_BLTOUCH _UxGT("BLTouch")#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selbsttest")#define MSG_BLTOUCH_RESET _UxGT("BLTouch zurücks.")#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren")#define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren")#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST#define MSG_FIRST _UxGT("homen")#define MSG_ZPROBE_ZOFFSET _UxGT("Sondenversatz Z")#define MSG_BABYSTEP_X _UxGT("Babystep X")#define MSG_BABYSTEP_Y _UxGT("Babystep Y")#define MSG_BABYSTEP_Z _UxGT("Babystep Z")#define MSG_ENDSTOP_ABORT _UxGT("Endstopp Abbr.")#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN ERFOLGLOS")#define MSG_HEATING_FAILED_LCD_BED _UxGT("Bett heizen fehlge.")#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMP-ABWEI.")#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")#define MSG_THERMAL_RUNAWAY_BED _UxGT("BETT") MSG_THERMAL_RUNAWAY#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST#define MSG_HALTED _UxGT("DRUCKER STOPP")#define MSG_PLEASE_RESET _UxGT("Bitte neustarten")#define MSG_SHORT_DAY _UxGT("t") // One character only#define MSG_SHORT_HOUR _UxGT("h") // One character only#define MSG_SHORT_MINUTE _UxGT("m") // One character only#define MSG_HEATING _UxGT("Extr. heizt...")#define MSG_COOLING _UxGT("Extr. kühlt...")#define MSG_BED_HEATING _UxGT("Bett heizt...")#define MSG_BED_COOLING _UxGT("Bett kühlt...")#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")#define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.")#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung")#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen")#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Sondenversatz Z")#define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod")#define MSG_DELTA_HEIGHT _UxGT("Höhe")#define MSG_DELTA_RADIUS _UxGT("Radius")#define MSG_INFO_MENU _UxGT("Über den Drucker")#define MSG_INFO_PRINTER_MENU _UxGT("Drucker-Info")#define MSG_3POINT_LEVELING _UxGT("3-Punkt-Nivellierung")#define MSG_LINEAR_LEVELING _UxGT("Lineare Nivellierung")#define MSG_BILINEAR_LEVELING _UxGT("Bilineare Nivell.")#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling")#define MSG_MESH_LEVELING _UxGT("Netz-Nivellierung")#define MSG_INFO_STATS_MENU _UxGT("Drucker-Statistik")#define MSG_INFO_BOARD_MENU _UxGT("Board-Info")#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren")#define MSG_INFO_EXTRUDERS _UxGT("Extruder")#define MSG_INFO_BAUDRATE _UxGT("Baudrate")#define MSG_INFO_PROTOCOL _UxGT("Protokoll")#define MSG_CASE_LIGHT _UxGT("Beleuchtung")#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit")#if LCD_WIDTH >= 20#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette Drucke")#define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")#define MSG_INFO_PRINT_LONGEST _UxGT("Längste Druckzeit")#define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")#else#define MSG_INFO_PRINT_COUNT _UxGT("Drucke")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette")#define MSG_INFO_PRINT_TIME _UxGT("Gesamte")#define MSG_INFO_PRINT_LONGEST _UxGT("Längste")#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")#endif#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")#define MSG_INFO_PSU _UxGT("Netzteil")#define MSG_DRIVE_STRENGTH _UxGT("Motorleistung")#define MSG_DAC_PERCENT _UxGT("Treiber %")#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT")#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("FILAMENT LADEN")#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("FILAMENT ENTLADEN")#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:")#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Mehr entladen")#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Druck weiter")#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")#define MSG_ERR_HOMING_FAILED _UxGT("Homing gescheitert")#define MSG_ERR_PROBING_FAILED _UxGT("Probing gescheitert")#define MSG_M600_TOO_COLD _UxGT("M600: zu kalt")//// Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen// ...oder 2 Zeilen auf einem 3-Zeilen-Display.#if LCD_HEIGHT >= 4// Up to 3 lines allowed#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des")#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels...")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf drücken")#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("um fortzusetzen")#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um")#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen")#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf")#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("bitte warten...")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments...")#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Warte auf")#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Entladen des")#define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filaments...")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzen des")#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Drucks...")#else // LCD_HEIGHT < 4// Up to 2 lines allowed#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klick zum Heizen")#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Entladen...")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entladen...")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")#endif // LCD_HEIGHT < 4#endif // LANGUAGE_DE_H