Blame | Last modification | View Log | RSS feed
/*** Marlin 3D Printer Firmware* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]** Based on Sprinter and grbl.* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm** This program is free software: you can redistribute it and/or modify* it under the terms of the GNU General Public License as published by* the Free Software Foundation, either version 3 of the License, or* (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program. If not, see <http://www.gnu.org/licenses/>.**//*** Croatian (Hrvatski)** LCD Menu Messages* See also http://marlinfw.org/docs/development/lcd_language.html**/#ifndef LANGUAGE_HR_H#define LANGUAGE_HR_H#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.#define CHARSIZE 2#define WELCOME_MSG MACHINE_NAME _UxGT(" spreman.")#define MSG_SD_INSERTED _UxGT("SD kartica umetnuta")#define MSG_SD_REMOVED _UxGT("SD kartica uklonjena")#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters#define MSG_MAIN _UxGT("Main")#define MSG_AUTOSTART _UxGT("Auto pokretanje")#define MSG_DISABLE_STEPPERS _UxGT("Ugasi steppere")#define MSG_AUTO_HOME _UxGT("Automatski homing")#define MSG_AUTO_HOME_X _UxGT("Home-aj X")#define MSG_AUTO_HOME_Y _UxGT("Home-aj Y")#define MSG_AUTO_HOME_Z _UxGT("Home-aj Z")#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriraj Z")#define MSG_LEVEL_BED_HOMING _UxGT("Home-aj XYZ")#define MSG_LEVEL_BED_WAITING _UxGT("Klikni za početak")#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sljedeća točka")#define MSG_LEVEL_BED_DONE _UxGT("Niveliranje gotovo!")#define MSG_SET_HOME_OFFSETS _UxGT("Postavi home offsete")#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets postavljeni")#define MSG_SET_ORIGIN _UxGT("Postavi ishodište")#define MSG_PREHEAT_1 _UxGT("Predgrij PLA")#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Sve")#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed")#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")#define MSG_PREHEAT_2 _UxGT("Predgrij ABS")#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Sve")#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")#define MSG_COOLDOWN _UxGT("HlaÄ‘enje")#define MSG_SWITCH_PS_ON _UxGT("Uključi napajanje")#define MSG_SWITCH_PS_OFF _UxGT("Isključi napajanje")#define MSG_EXTRUDE _UxGT("Extrude")#define MSG_RETRACT _UxGT("Retract")#define MSG_MOVE_AXIS _UxGT("Miči os")#define MSG_BED_LEVELING _UxGT("Niveliraj bed")#define MSG_LEVEL_BED _UxGT("Niveliraj bed")#define MSG_MOVE_X _UxGT("Miči X")#define MSG_MOVE_Y _UxGT("Miči Y")#define MSG_MOVE_Z _UxGT("Miči Z")#define MSG_MOVE_E _UxGT("Extruder")#define MSG_MOVE_01MM _UxGT("Miči 0.1mm")#define MSG_MOVE_1MM _UxGT("Miči 1mm")#define MSG_MOVE_10MM _UxGT("Miči 10mm")#define MSG_SPEED _UxGT("Brzina")#define MSG_BED_Z _UxGT("Bed Z")#define MSG_NOZZLE _UxGT("Dizna")#define MSG_BED _UxGT("Bed")#define MSG_FAN_SPEED _UxGT("Brzina ventilatora")#define MSG_FLOW _UxGT("Flow")#define MSG_CONTROL _UxGT("Control")#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")#define MSG_AUTOTEMP _UxGT("Autotemp")#define MSG_ON _UxGT("On ")#define MSG_OFF _UxGT("Off")#define MSG_PID_P _UxGT("PID-P")#define MSG_PID_I _UxGT("PID-I")#define MSG_PID_D _UxGT("PID-D")#define MSG_PID_C _UxGT("PID-C")#define MSG_SELECT _UxGT("Odaberi")#define MSG_ACC _UxGT("Accel")#define MSG_JERK _UxGT("Jerk")#if IS_KINEMATIC#define MSG_VA_JERK _UxGT("Va-jerk")#define MSG_VB_JERK _UxGT("Vb-jerk")#define MSG_VC_JERK _UxGT("Vc-jerk")#else#define MSG_VA_JERK _UxGT("Vx-jerk")#define MSG_VB_JERK _UxGT("Vy-jerk")#define MSG_VC_JERK _UxGT("Vz-jerk")#endif#define MSG_VE_JERK _UxGT("Ve-jerk")#define MSG_VMAX _UxGT("Vmax ")#define MSG_VMIN _UxGT("Vmin")#define MSG_VTRAV_MIN _UxGT("VTrav min")#define MSG_AMAX _UxGT("Amax ")#define MSG_A_RETRACT _UxGT("A-retract")#define MSG_A_TRAVEL _UxGT("A-travel")#define MSG_STEPS_PER_MM _UxGT("Steps/mm")#if IS_KINEMATIC#define MSG_ASTEPS _UxGT("Asteps/mm")#define MSG_BSTEPS _UxGT("Bsteps/mm")#define MSG_CSTEPS _UxGT("Csteps/mm")#else#define MSG_ASTEPS _UxGT("Xsteps/mm")#define MSG_BSTEPS _UxGT("Ysteps/mm")#define MSG_CSTEPS _UxGT("Zsteps/mm")#endif#define MSG_ESTEPS _UxGT("Esteps/mm")#define MSG_E1STEPS _UxGT("E1steps/mm")#define MSG_E2STEPS _UxGT("E2steps/mm")#define MSG_E3STEPS _UxGT("E3steps/mm")#define MSG_E4STEPS _UxGT("E4steps/mm")#define MSG_E5STEPS _UxGT("E5steps/mm")#define MSG_TEMPERATURE _UxGT("Temperature")#define MSG_MOTION _UxGT("Gibanje")#define MSG_FILAMENT _UxGT("Filament")#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")#define MSG_CONTRAST _UxGT("Kontrast LCD-a")#define MSG_STORE_EEPROM _UxGT("Pohrani u memoriju")#define MSG_LOAD_EEPROM _UxGT("Učitaj memoriju")#define MSG_RESTORE_FAILSAFE _UxGT("Učitaj failsafe")#define MSG_REFRESH _UxGT("Osvježi")#define MSG_WATCH _UxGT("Info screen")#define MSG_PREPARE _UxGT("Pripremi")#define MSG_TUNE _UxGT("Tune")#define MSG_PAUSE_PRINT _UxGT("Pauziraj print")#define MSG_RESUME_PRINT _UxGT("Nastavi print")#define MSG_STOP_PRINT _UxGT("Zaustavi print")#define MSG_CARD_MENU _UxGT("Printaj s SD kartice")#define MSG_NO_CARD _UxGT("Nema SD kartice")#define MSG_DWELL _UxGT("Sleep...")#define MSG_USERWAIT _UxGT("Čekaj korisnika...")#define MSG_PRINT_ABORTED _UxGT("Print otkazan")#define MSG_NO_MOVE _UxGT("No move.")#define MSG_KILLED _UxGT("KILLED. ")#define MSG_STOPPED _UxGT("ZAUSTAVLJEN. ")#define MSG_CONTROL_RETRACT _UxGT("Retract mm")#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")#define MSG_CONTROL_RETRACTF _UxGT("Retract V")#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")#define MSG_AUTORETRACT _UxGT("AutoRetr.")#define MSG_FILAMENTCHANGE _UxGT("Promijeni filament")#define MSG_INIT_SDCARD _UxGT("Init. SD karticu")#define MSG_CNG_SDCARD _UxGT("Promijeni SD karticu")#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST#define MSG_FIRST _UxGT("first")#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")#define MSG_BABYSTEP_X _UxGT("Babystep X")#define MSG_BABYSTEP_Y _UxGT("Babystep Y")#define MSG_BABYSTEP_Z _UxGT("Babystep Z")#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")#define MSG_HEATING_FAILED_LCD _UxGT("Grijanje neuspješno")#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST#define MSG_HALTED _UxGT("PRINTER HALTED")#define MSG_PLEASE_RESET _UxGT("Please reset")#define MSG_SHORT_DAY _UxGT("d") // One character only#define MSG_SHORT_HOUR _UxGT("h") // One character only#define MSG_SHORT_MINUTE _UxGT("m") // One character only#define MSG_HEATING _UxGT("Grijanje...")#define MSG_BED_HEATING _UxGT("Grijanje Bed-a...")#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibracija")#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriraj X")#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriraj Y")#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriraj Z")#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriraj Središte")#define MSG_INFO_MENU _UxGT("O printeru")#define MSG_INFO_PRINTER_MENU _UxGT("Podaci o printeru")#define MSG_INFO_STATS_MENU _UxGT("Statistika printera")#define MSG_INFO_BOARD_MENU _UxGT("Podaci o elektronici")#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori")#define MSG_INFO_EXTRUDERS _UxGT("Extruderi")#define MSG_INFO_BAUDRATE _UxGT("Baud")#define MSG_INFO_PROTOCOL _UxGT("Protokol")#define MSG_CASE_LIGHT _UxGT("Osvjetljenje")#if LCD_WIDTH >= 20#define MSG_INFO_PRINT_COUNT _UxGT("Broj printova")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni")#define MSG_INFO_PRINT_TIME _UxGT("Ukupno printanja")#define MSG_INFO_PRINT_LONGEST _UxGT("Najduži print")#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano ukupno")#else#define MSG_INFO_PRINT_COUNT _UxGT("Printovi")#define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni")#define MSG_INFO_PRINT_TIME _UxGT("Ukupno")#define MSG_INFO_PRINT_LONGEST _UxGT("Najduži")#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano")#endif#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")#define MSG_INFO_PSU _UxGT("Napajanje")#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")#define MSG_DAC_PERCENT _UxGT("Driver %")#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print")#if LCD_HEIGHT >= 4// Up to 3 lines allowed#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekaj početak")#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamenta")#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("promijeni")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekaj")#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Umetni filament")#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i pritisni tipku")#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj")#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")#else // LCD_HEIGHT < 4// Up to 2 lines allowed#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Pričekaj...")#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...")#endif // LCD_HEIGHT < 4#endif // LANGUAGE_HR_H