Blame | Last modification | View Log | RSS feed
/*** Marlin 3D Printer Firmware* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]** Based on Sprinter and grbl.* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm** This program is free software: you can redistribute it and/or modify* it under the terms of the GNU General Public License as published by* the Free Software Foundation, either version 3 of the License, or* (at your option) any later version.** This program is distributed in the hope that it will be useful,* but WITHOUT ANY WARRANTY; without even the implied warranty of* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the* GNU General Public License for more details.** You should have received a copy of the GNU General Public License* along with this program. If not, see <http://www.gnu.org/licenses/>.**//*** Traditional Chinese** LCD Menu Messages* See also http://marlinfw.org/docs/development/lcd_language.html**/#ifndef LANGUAGE_ZH_TW_H#define LANGUAGE_ZH_TW_H#define CHARSIZE 3#define WELCOME_MSG MACHINE_NAME _UxGT("已就緒.") //" ready."#define MSG_BACK _UxGT("返回") // ”Back“#define MSG_SD_INSERTED _UxGT("記憶卡已插入") //"Card inserted"#define MSG_SD_REMOVED _UxGT("記憶卡被拔出") //"Card removed"#define MSG_LCD_ENDSTOPS _UxGT("擋塊") //"Endstops" // Max length 8 characters#define MSG_MAIN _UxGT("主選單") //"Main"#define MSG_AUTOSTART _UxGT("自動開始") //"Autostart"#define MSG_DISABLE_STEPPERS _UxGT("關閉步進馬達") //"Disable steppers"#define MSG_DEBUG_MENU _UxGT("除錯選單") // "Debug Menu"#define MSG_PROGRESS_BAR_TEST _UxGT("進度條測試") // "Progress Bar Test"#define MSG_AUTO_HOME _UxGT("自動回原點") //"Auto home"#define MSG_AUTO_HOME_X _UxGT("回X原點") //"Home X"#define MSG_AUTO_HOME_Y _UxGT("回Y原點") //"Home Y"#define MSG_AUTO_HOME_Z _UxGT("回Z原點") //"Home Z"#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校準Z") //"Calibrate Z"#define MSG_LEVEL_BED_HOMING _UxGT("平台調平XYZ歸原點") //"Homing XYZ"#define MSG_LEVEL_BED_WAITING _UxGT("單擊開始熱床調平") //"Click to Begin"#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下個熱床調平點") //"Next Point"#define MSG_LEVEL_BED_DONE _UxGT("完成熱床調平") //"Leveling Done!"#define MSG_Z_FADE_HEIGHT _UxGT("淡出高度") // "Fade Height"#define MSG_SET_HOME_OFFSETS _UxGT("設置原點偏移") //"Set home offsets"#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已啟用") //"Offsets applied"#define MSG_SET_ORIGIN _UxGT("設置原點") //"Set origin"#define MSG_PREHEAT_1 _UxGT("預熱PLA") //"Preheat PLA"#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 熱床") //MSG_PREHEAT_1 " Bed"#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 設置") //MSG_PREHEAT_1 " conf"#define MSG_PREHEAT_2 _UxGT("預熱ABS") //"Preheat ABS"#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 熱床") //MSG_PREHEAT_2 " Bed"#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 設置") //MSG_PREHEAT_2 " conf"#define MSG_COOLDOWN _UxGT("降溫") //"Cooldown"#define MSG_SWITCH_PS_ON _UxGT("電源打開") //"Switch power on"#define MSG_SWITCH_PS_OFF _UxGT("電源關閉") //"Switch power off"#define MSG_EXTRUDE _UxGT("擠出") //"Extrude"#define MSG_RETRACT _UxGT("回縮") //"Retract"#define MSG_MOVE_AXIS _UxGT("移動軸") //"Move axis"#define MSG_BED_LEVELING _UxGT("調平熱床") //"Bed leveling"#define MSG_LEVEL_BED _UxGT("調平熱床") //"Level bed"#define MSG_LEVEL_CORNERS _UxGT("調平邊角") // "Level corners"#define MSG_NEXT_CORNER _UxGT("下个邊角") // "Next corner"#define MSG_EDITING_STOPPED _UxGT("網格編輯已停止") // "Mesh Editing Stopped"#define MSG_USER_MENU _UxGT("客制命令") // "Custom Commands"#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29"#define MSG_UBL_UNHOMED _UxGT("先回XYZ原點") // "Home XYZ first"#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools"#define MSG_UBL_LEVEL_BED _UxGT("統一熱床調平(UBL)") // "Unified Bed Leveling"#define MSG_UBL_MANUAL_MESH _UxGT("手工建网") // "Manually Build Mesh"#define MSG_UBL_BC_INSERT _UxGT("放置墊片並測量") // "Place shim & measure"#define MSG_UBL_BC_INSERT2 _UxGT("測量") // "Measure"#define MSG_UBL_BC_REMOVE _UxGT("移除並測量熱床") // "Remove & measure bed"#define MSG_UBL_MOVING_TO_NEXT _UxGT("移動到下一個") // "Moving to next"#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL"#define MSG_UBL_DEACTIVATE_MESH _UxGT("關閉UBL") // "Deactivate UBL"#define MSG_UBL_SET_BED_TEMP _UxGT("設置熱床溫度") // "Bed Temp"#define MSG_UBL_SET_HOTEND_TEMP _UxGT("熱端溫度") // "Hotend Temp"#define MSG_UBL_MESH_EDIT _UxGT("網格編輯") // "Mesh Edit"#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("編輯客戶網格") // "Edit Custom Mesh"#define MSG_UBL_FINE_TUNE_MESH _UxGT("細調網格") // "Fine Tuning Mesh"#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成編輯網格") // "Done Editing Mesh"#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("創設客戶網格") // "Build Custom Mesh"#define MSG_UBL_BUILD_MESH_MENU _UxGT("創設網格") // "Build Mesh"#define MSG_UBL_BUILD_PLA_MESH _UxGT("創設PLA網格") // "Build PLA Mesh"#define MSG_UBL_BUILD_ABS_MESH _UxGT("創設ABS網格") // "Build ABS Mesh"#define MSG_UBL_BUILD_COLD_MESH _UxGT("創設冷網格") // "Build Cold Mesh"#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("調整網格高度") // "Adjust Mesh Height"#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合計") // "Height Amount"#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准網格") // "Validate Mesh"#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA網格") // "Validate PLA Mesh"#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS網格") // "Validate ABS Mesh"#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客戶網格") // "Validate Custom Mesh"#define MSG_UBL_CONTINUE_MESH _UxGT("繼續熱床網格") // "Continue Bed Mesh"#define MSG_UBL_MESH_LEVELING _UxGT("網格調平") // "Mesh Leveling"#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三點調平") // "3-Point Leveling"#define MSG_UBL_GRID_MESH_LEVELING _UxGT("格子網格調平") // "Grid Mesh Leveling"#define MSG_UBL_MESH_LEVEL _UxGT("調平網格") // "Level Mesh"#define MSG_UBL_SIDE_POINTS _UxGT("邊點") // "Side Points"#define MSG_UBL_MAP_TYPE _UxGT("圖類型") // "Map Type"#define MSG_UBL_OUTPUT_MAP _UxGT("輸出網格圖") // "Output Mesh Map"#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("輸出到主機") // "Output for Host"#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("輸出到CSV") // "Output for CSV"#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("輸出到備份") // "Off Printer Backup"#define MSG_UBL_INFO_UBL _UxGT("輸出UBL信息") // "Output UBL Info"#define MSG_UBL_EDIT_MESH_MENU _UxGT("編輯網格") // "Edit Mesh"#define MSG_UBL_FILLIN_AMOUNT _UxGT("填充合計") // "Fill-in Amount"#define MSG_UBL_MANUAL_FILLIN _UxGT("手工填充") // "Manual Fill-in"#define MSG_UBL_SMART_FILLIN _UxGT("聰明填充") // "Smart Fill-in"#define MSG_UBL_FILLIN_MESH _UxGT("填充網格") // "Fill-in Mesh"#define MSG_UBL_INVALIDATE_ALL _UxGT("作廢所有的") // "Invalidate All"#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("作廢最近的") // "Invalidate Closest"#define MSG_UBL_FINE_TUNE_ALL _UxGT("細調所有的") // "Fine Tune All"#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("細調最近的") // "Fine Tune Closest"#define MSG_UBL_STORAGE_MESH_MENU _UxGT("網格存儲") // "Mesh Storage"#define MSG_UBL_STORAGE_SLOT _UxGT("存儲槽") // "Memory Slot"#define MSG_UBL_LOAD_MESH _UxGT("裝載熱床網格") // "Load Bed Mesh"#define MSG_UBL_SAVE_MESH _UxGT("保存熱床網格") // "Save Bed Mesh"#define MSG_MESH_LOADED _UxGT("網格 %i 已裝載") // "Mesh %i loaded"#define MSG_MESH_SAVED _UxGT("網格 %i 已保存") // "Mesh %i saved"#define MSG_NO_STORAGE _UxGT("沒有存儲") // "No storage"#define MSG_UBL_SAVE_ERROR _UxGT("錯誤: UBL保存") // "Err: UBL Save"#define MSG_UBL_RESTORE_ERROR _UxGT("錯誤: UBL還原") // "Err: UBL Restore"#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z偏移已停止") // "Z-Offset Stopped"#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("一步步UBL") // "Step-By-Step UBL"#define MSG_LED_CONTROL _UxGT("灯管控制") // "LED Control")#define MSG_LEDS _UxGT("灯") // "Lights")#define MSG_LED_PRESETS _UxGT("灯预置") // "Light Presets")#define MSG_SET_LEDS_RED _UxGT("红") // "Red")#define MSG_SET_LEDS_ORANGE _UxGT("橙") // "Orange")#define MSG_SET_LEDS_YELLOW _UxGT("黄") // "Yellow")#define MSG_SET_LEDS_GREEN _UxGT("绿") // "Green")#define MSG_SET_LEDS_BLUE _UxGT("蓝") // "Blue")#define MSG_SET_LEDS_INDIGO _UxGT("青") // "Indigo")#define MSG_SET_LEDS_VIOLET _UxGT("紫") // "Violet")#define MSG_SET_LEDS_WHITE _UxGT("白") // "White")#define MSG_SET_LEDS_DEFAULT _UxGT("缺省") // "Default")#define MSG_CUSTOM_LEDS _UxGT("定制灯") // "Custom Lights")#define MSG_INTENSITY_R _UxGT("红飽和度") // "Red Intensity")#define MSG_INTENSITY_G _UxGT("绿飽和度") // "Green Intensity")#define MSG_INTENSITY_B _UxGT("蓝飽和度") // "Blue Intensity")#define MSG_INTENSITY_W _UxGT("白飽和度") // "White Intensity")#define MSG_LED_BRIGHTNESS _UxGT("亮度") // "Brightness")#define MSG_MOVING _UxGT("移动 ...") // "Moving...")#define MSG_FREE_XY _UxGT("释放 XY") // "Free XY")#define MSG_MOVE_X _UxGT("移動X") //"Move X"#define MSG_MOVE_Y _UxGT("移動Y") //"Move Y"#define MSG_MOVE_Z _UxGT("移動Z") //"Move Z"#define MSG_MOVE_E _UxGT("擠出機") //"Extruder"#define MSG_MOVE_01MM _UxGT("移動 0.1 mm") //"Move 0.1mm"#define MSG_MOVE_1MM _UxGT("移動 1 mm") //"Move 1mm"#define MSG_MOVE_10MM _UxGT("移動 10 mm") //"Move 10mm"#define MSG_SPEED _UxGT("速率") //"Speed"#define MSG_BED_Z _UxGT("熱床Z") //"Bed Z"#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 噴嘴") //"Nozzle" 噴嘴#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 熱床") //"Bed"#define MSG_FAN_SPEED _UxGT("風扇速率") //"Fan speed"#define MSG_EXTRA_FAN_SPEED _UxGT("額外風扇速率") // "Extra fan speed"#define MSG_FLOW _UxGT("擠出速率") //"Flow"#define MSG_CONTROL _UxGT("控制") //"Control"#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min"#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max"#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 系數") //" " LCD_STR_THERMOMETER " Fact"#define MSG_AUTOTEMP _UxGT("自動控溫") //"Autotemp"#define MSG_ON _UxGT("開 ") //"On "#define MSG_OFF _UxGT("關 ") //"Off"#define MSG_PID_P _UxGT("PID-P") //"PID-P"#define MSG_PID_I _UxGT("PID-I") //"PID-I"#define MSG_PID_D _UxGT("PID-D") //"PID-D"#define MSG_PID_C _UxGT("PID-C") //"PID-C"#define MSG_SELECT _UxGT("選擇") //"Select"#define MSG_ACC _UxGT("加速度") //"Accel" acceleration#define MSG_JERK _UxGT("抖動速率") //"Jerk"#if IS_KINEMATIC#define MSG_VA_JERK _UxGT("A軸抖動速率") //"Va-jerk"#define MSG_VB_JERK _UxGT("B軸抖動速率") //"Vb-jerk"#define MSG_VC_JERK _UxGT("C軸抖動速率") //"Vc-jerk"#else#define MSG_VA_JERK _UxGT("X軸抖動速率") //"Vx-jerk"#define MSG_VB_JERK _UxGT("Y軸抖動速率") //"Vy-jerk"#define MSG_VC_JERK _UxGT("Z軸抖動速率") //"Vz-jerk"#endif#define MSG_VE_JERK _UxGT("擠出機抖動速率") //"Ve-jerk"#define MSG_VELOCITY _UxGT("速度") // "Velocity"#define MSG_VMAX _UxGT("最大進料速率") //"Vmax " max_feedrate_mm_s#define MSG_VMIN _UxGT("最小進料速率") //"Vmin" min_feedrate_mm_s#define MSG_VTRAV_MIN _UxGT("最小移動速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move#define MSG_ACCELERATION _UxGT("加速度") // "Acceleration"#define MSG_AMAX _UxGT("最大列印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves#define MSG_A_RETRACT _UxGT("回縮加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts#define MSG_A_TRAVEL _UxGT("非列印移動加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves#define MSG_STEPS_PER_MM _UxGT("軸步數/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92#if IS_KINEMATIC#define MSG_ASTEPS _UxGT("A軸步數/mm") //"Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92#define MSG_BSTEPS _UxGT("B軸步數/mm") //"Bsteps/mm"#define MSG_CSTEPS _UxGT("C軸步數/mm") //"Csteps/mm"#else#define MSG_ASTEPS _UxGT("X軸步數/mm") //"Xsteps/mm" axis_steps_per_mm, axis steps-per-unit G92#define MSG_BSTEPS _UxGT("Y軸步數/mm") //"Ysteps/mm"#define MSG_CSTEPS _UxGT("Z軸步數/mm") //"Zsteps/mm"#endif#define MSG_ESTEPS _UxGT("擠出機步數/mm") //"Esteps/mm"#define MSG_E1STEPS _UxGT("擠出機1步數/mm") //"E1steps/mm"#define MSG_E2STEPS _UxGT("擠出機2步數/mm") //"E2steps/mm"#define MSG_E3STEPS _UxGT("擠出機3步數/mm") //"E3steps/mm"#define MSG_E4STEPS _UxGT("擠出機4步數/mm") //"E4steps/mm"#define MSG_E5STEPS _UxGT("擠出機5步數/mm") //"E5steps/mm"#define MSG_TEMPERATURE _UxGT("溫度") //"Temperature"#define MSG_MOTION _UxGT("運作") //"Motion"#define MSG_FILAMENT _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu#define MSG_VOLUMETRIC_ENABLED _UxGT("測容積mm³") //"E in mm3" volumetric_enabled#define MSG_FILAMENT_DIAM _UxGT("絲料直徑") //"Fil. Dia."#define MSG_FILAMENT_UNLOAD _UxGT("卸載 mm") // "Unload mm"#define MSG_FILAMENT_LOAD _UxGT("装載 mm") // "Load mm"#define MSG_ADVANCE_K _UxGT("Advance K") // "Advance K"#define MSG_CONTRAST _UxGT("LCD對比度") //"LCD contrast"#define MSG_STORE_EEPROM _UxGT("保存設置") //"Store memory"#define MSG_LOAD_EEPROM _UxGT("載入設置") //"Load memory"#define MSG_RESTORE_FAILSAFE _UxGT("恢復安全值") //"Restore failsafe"#define MSG_INIT_EEPROM _UxGT("初始化設置") // "Initialize EEPROM"#define MSG_REFRESH _UxGT("刷新") //"Refresh"#define MSG_WATCH _UxGT("資訊界面") //"Info screen"#define MSG_PREPARE _UxGT("準備") //"Prepare"#define MSG_TUNE _UxGT("調整") //"Tune"#define MSG_PAUSE_PRINT _UxGT("暫停列印") //"Pause print"#define MSG_RESUME_PRINT _UxGT("恢復列印") //"Resume print"#define MSG_STOP_PRINT _UxGT("停止列印") //"Stop print"#define MSG_CARD_MENU _UxGT("從記憶卡上列印") //"Print from SD"#define MSG_NO_CARD _UxGT("無記憶卡") //"No SD card"#define MSG_DWELL _UxGT("休眠 ...") //"Sleep..."#define MSG_USERWAIT _UxGT("點擊繼續 ...") //"Click to resume..."#define MSG_PRINT_PAUSED _UxGT("列印已暫停") // "Print paused"#define MSG_PRINT_ABORTED _UxGT("已取消列印") //"Print aborted"#define MSG_NO_MOVE _UxGT("無移動") //"No move."#define MSG_KILLED _UxGT("已砍掉") //"KILLED. "#define MSG_STOPPED _UxGT("已停止") //"STOPPED. "#define MSG_CONTROL_RETRACT _UxGT("回縮長度mm") //"Retract mm" retract_length, retract length (positive mm)#define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change#define MSG_CONTROL_RETRACTF _UxGT("回縮速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回縮恢復長度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering)#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回縮恢復長度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change)#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回縮恢復後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V"#define MSG_AUTORETRACT _UxGT("自動回縮") //"AutoRetr." autoretract_enabled,#define MSG_FILAMENTCHANGE _UxGT("更換絲料") //"Change filament"#define MSG_FILAMENTLOAD _UxGT("裝載絲料") // "Load filament"#define MSG_FILAMENTUNLOAD _UxGT("卸載絲料") // "Unload filament"#define MSG_FILAMENTUNLOAD_ALL _UxGT("卸載全部") // "Unload All"#define MSG_INIT_SDCARD _UxGT("初始化記憶卡") //"Init. SD card"#define MSG_CNG_SDCARD _UxGT("更換記憶卡") //"Change SD card"#define MSG_ZPROBE_OUT _UxGT("Z探針在熱床之外") //"Z probe out. bed" Z probe is not within the physical limits#define MSG_SKEW_FACTOR _UxGT("偏斜因數") // "Skew Factor"#define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch"#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch 自檢") // "BLTouch Self-Test"#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch"#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch"#define MSG_BLTOUCH_STOW _UxGT("裝載BLTouch") // "Stow BLTouch"#define MSG_HOME _UxGT("歸位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST#define MSG_FIRST _UxGT("先") //"first"#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"#define MSG_BABYSTEP_X _UxGT("微量調整X軸") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts#define MSG_BABYSTEP_Y _UxGT("微量調整Y軸") //"Babystep Y"#define MSG_BABYSTEP_Z _UxGT("微量調整Z軸") //"Babystep Z"#define MSG_ENDSTOP_ABORT _UxGT("擋塊終止") //"Endstop abort"#define MSG_HEATING_FAILED_LCD _UxGT("加熱失敗") //"Heating failed"#define MSG_ERR_REDUNDANT_TEMP _UxGT("錯誤：REDUNDANT TEMP") //"Err: REDUNDANT TEMP"#define MSG_THERMAL_RUNAWAY _UxGT("溫控失控") //"THERMAL RUNAWAY"#define MSG_ERR_MAXTEMP _UxGT("錯誤：最高溫度") //"Err: MAXTEMP"#define MSG_ERR_MINTEMP _UxGT("錯誤：最低溫度") //"Err: MINTEMP"#define MSG_ERR_MAXTEMP_BED _UxGT("錯誤：最高熱床溫度") //"Err: MAXTEMP BED"#define MSG_ERR_MINTEMP_BED _UxGT("錯誤：最低熱床溫度") //"Err: MINTEMP BED"#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST#define MSG_HALTED _UxGT("印表機停機") //"PRINTER HALTED"#define MSG_PLEASE_RESET _UxGT("請重置") //"Please reset"#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only#define MSG_SHORT_HOUR _UxGT("時") //"h" // One character only#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only#define MSG_HEATING _UxGT("加熱中 ...") //"Heating..."#define MSG_BED_HEATING _UxGT("加熱熱床中...") //"Bed Heating..."#define MSG_DELTA_CALIBRATE _UxGT("⊿校準") //"Delta Calibration"#define MSG_DELTA_CALIBRATE_X _UxGT("⊿校準X") //"Calibrate X"#define MSG_DELTA_CALIBRATE_Y _UxGT("⊿校準Y") //"Calibrate Y"#define MSG_DELTA_CALIBRATE_Z _UxGT("⊿校準Z") //"Calibrate Z"#define MSG_DELTA_CALIBRATE_CENTER _UxGT("⊿校準中心") //"Calibrate Center"#define MSG_DELTA_SETTINGS _UxGT("⊿設置") // "Delta Settings"#define MSG_DELTA_AUTO_CALIBRATE _UxGT("⊿自動校準") // "Auto Calibration"#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("設置⊿高度") // "Set Delta Height"#define MSG_DELTA_DIAG_ROD _UxGT("⊿斜柱") // "Diag Rod"#define MSG_DELTA_HEIGHT _UxGT("⊿高度") // "Height"#define MSG_DELTA_RADIUS _UxGT("⊿半徑") // "Radius"#define MSG_INFO_MENU _UxGT("關於印表機") //"About Printer"#define MSG_INFO_PRINTER_MENU _UxGT("印表機訊息") //"Printer Info"#define MSG_3POINT_LEVELING _UxGT("三點調平") // "3-Point Leveling"#define MSG_LINEAR_LEVELING _UxGT("線性調平") // "Linear Leveling"#define MSG_BILINEAR_LEVELING _UxGT("雙線性調平") // "Bilinear Leveling"#define MSG_UBL_LEVELING _UxGT("統一熱床調平(UBL)") // "Unified Bed Leveling"#define MSG_MESH_LEVELING _UxGT("網格調平") // "Mesh Leveling"#define MSG_INFO_STATS_MENU _UxGT("印表機統計") //"Printer Stats"#define MSG_INFO_BOARD_MENU _UxGT("主板訊息") //"Board Info"#define MSG_INFO_THERMISTOR_MENU _UxGT("溫度計") //"Thermistors"#define MSG_INFO_EXTRUDERS _UxGT("擠出機") //"Extruders"#define MSG_INFO_BAUDRATE _UxGT("傳輸率") //"Baud"#define MSG_INFO_PROTOCOL _UxGT("協議") //"Protocol"#define MSG_CASE_LIGHT _UxGT("外殼燈") // "Case light"#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("燈亮度") // "Light BRIGHTNESS"#if LCD_WIDTH > 19#define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count"#define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed"#define MSG_INFO_PRINT_TIME _UxGT("總列印時間") //"Total print time"#define MSG_INFO_PRINT_LONGEST _UxGT("最長工作時間") //"Longest job time"#define MSG_INFO_PRINT_FILAMENT _UxGT("總計擠出") //"Extruded total"#else#define MSG_INFO_PRINT_COUNT _UxGT("列印數") //"Prints"#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed"#define MSG_INFO_PRINT_TIME _UxGT("總共") //"Total"#define MSG_INFO_PRINT_LONGEST _UxGT("最長") //"Longest"#define MSG_INFO_PRINT_FILAMENT _UxGT("已擠出") //"Extruded"#endif#define MSG_INFO_MIN_TEMP _UxGT("最低溫度") //"Min Temp"#define MSG_INFO_MAX_TEMP _UxGT("最高溫度") //"Max Temp"#define MSG_INFO_PSU _UxGT("電源供應") //"Power Supply"#define MSG_DRIVE_STRENGTH _UxGT("驅動力度") // "Drive Strength"#define MSG_DAC_PERCENT _UxGT("驅動 %") // "Driver %"#define MSG_DAC_EEPROM_WRITE _UxGT("保存驅動設置") // "DAC EEPROM Write"#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("列印已暫停") // "PRINT PAUSED"#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("裝載絲料") // "LOAD FILAMENT"#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("卸載絲料") // "UNLOAD FILAMENT"#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("恢複選項:") // "RESUME OPTIONS:"#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("清除更多") // "Purge more"#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢復列印") //"Resume print"#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" 噴嘴: ") // " Nozzle: "#define MSG_ERR_HOMING_FAILED _UxGT("歸原位失敗") // "Homing failed"#define MSG_ERR_PROBING_FAILED _UxGT("探針探測失敗") // "Probing failed"#define MSG_M600_TOO_COLD _UxGT("M600: 太涼") // "M600: Too cold"#if LCD_HEIGHT >= 4#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待開始") //"Wait for start"#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("絲料") //"of the filament"#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("變更") //"change"#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for"#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下絲料") //"filament unload"#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入絲料") //"Insert filament"#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("並按鍵") //"and press button"#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("繼續 ...") //"to continue..."#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按鈕來") // "Press button to"#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加熱噴嘴.") // "heat nozzle."#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱噴嘴") // "Heating nozzle"#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("請等待 ...") // "Please wait..."#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load"#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for"#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("絲料清除") // "filament purge"#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print"#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume"#else // LCD_HEIGHT < 4#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("請等待 ...") //"Please wait..."#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click"#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱中 ...") // "Heating..."#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..."#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..."#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..."#endif // LCD_HEIGHT < 4#endif // LANGUAGE_ZH_TW_H